coil transfers: ECS product.. Dave????

coil transfers: ECS product.. Dave???? - 06/21/14 02:27 PM

Hey guys.
Just got my coil transfer for the Daytona. Meant to ask Tom at ECS, but forgot. Since I bought one transfer and don't wanna screw it up, has anyone already done this and how difficult/easy is it. Would like to feed off some of your experiences before I start peeling back the paper to install it on my black MSD Blaster coil. Dave, you out there?

Cheers,
Troy

Posted By: GMP440

Re: coil transfers: ECS product.. Dave???? - 06/21/14 02:40 PM

What's the price of the decals?

Posted By: Seventythree

Re: coil transfers: ECS product.. Dave???? - 06/21/14 02:50 PM

This video may help. My screw-ups with the dry transfer rubs taught me a couple of things; do not over heat the dry transfer, and make sure you remove the protective film before heating, lol.

https://www.youtube.com/watch?v=8b2gCy3af7g

Posted By: hemi68charger

Re: coil transfers: ECS product.. Dave???? - 06/21/14 03:10 PM

Quote:

What's the price of the decals?

Plug for Dave and his crew...

http://www.ecsautomotive.com/productdesc.php?co=c&id=72

CDT10 1969-1971 All Chrysler Vehicles $24.00
Dates Available:
29th Week of 1968
12th Week of 1969
28th Week of 1969
46th Week of 1969
12th Week of 1970
28th Week of 1970
46th Week of 1970

Posted By: hemi68charger

Re: coil transfers: ECS product.. Dave???? - 06/21/14 06:20 PM

Quote:

This video may help. My screw-ups with the dry transfer rubs taught me a couple of things; do not over heat the dry transfer, and make sure you remove the protective film before heating, lol.

https://www.youtube.com/watch?v=8b2gCy3af7g

Perfect....... I don't believe the instructions were inserted with my order, so this is perfect....

Dave,
thanks for the video...

Posted By: Anonymous

Re: coil transfers: ECS product.. Dave???? - 06/22/14 02:37 PM

I've had to use one on one of our cars (think it was the challenger) and it went on no problems. Make sure that the paint on the coil (if you repainted it) has dried long enough to let all of the outgassing from the paint expel. Otherwise you could run into problems with the transfer sticking. I have personally not had that happen but have read on other threads about that happening. So far I have yet to have any problems with any of the transfers that ECS sells.

Posted By: hemi68charger

Re: coil transfers: ECS product.. Dave???? - 06/22/14 03:07 PM

Did it yesterday and as Dave's video showed, it was real easy... Here's what I did to the MSD Blaster coil for my MSD-6A system I have on the Daytona.

Attached picture 8183995-coil_06_22.jpg

Posted By: EL5 71

Re: coil transfers: ECS product.. Dave???? - 06/22/14 03:48 PM

That looks great Troy!! Well done.