Moparts

1970 Challenger Details - Cowl

Posted By: ScottSmith_Harms

1970 Challenger Details - Cowl - 04/10/14 07:22 AM

Hi guys, I'm looking to find variables on 1970 Challenger cowl sheet metal. Here is a pic of one example (383 RT/SE Los Angeles car). I'm looking for other picture examples to compare with. If you could post a picture (drivers side, same view as my pic), the original plant and engine combo I'd REALLY appreciate it!

Thanks!

Attached picture 8107638-ChallengerCowl.jpg
Posted By: 6bblgt

Re: 1970 Challenger Details - Cowl - 04/10/14 08:29 AM

Any clues as to what we are actually looking at & from what direction - LH door jamb? is that the upper door hinge?
Posted By: David68charger

Re: 1970 Challenger Details - Cowl - 04/10/14 02:53 PM

I would gladly take a pic of my 70, however, can you take a wider angle shot and more info?
Posted By: Beebuzzn

Re: 1970 Challenger Details - Cowl - 04/10/14 06:53 PM

Don't know if this will help 928spd A66 Hamtramck car original paint.

Attached picture 8107888-Pic314(1024x768).jpg
Posted By: cudaized

Re: 1970 Challenger Details - Cowl - 04/10/14 10:51 PM

Quote:

1970 Challenger cowl sheet metal. Here is a pic of one example (383 RT/SE Los Angeles car)



Where is the L bracket to fasten the rear of the fender? Was it even there?

Attached picture 8108065-DSC06937.JPG
Posted By: ScottSmith_Harms

Re: 1970 Challenger Details - Cowl - 04/11/14 12:21 AM

Its the drivers side upper cowl area that you can see when you open the door and look toward the font/center of the car.
Posted By: dilvoy

Re: 1970 Challenger Details - Cowl - 04/11/14 06:43 AM

This is a shot of a '70 440-6 challenger. Hamtramk

Posted By: Suregrip391

Re: 1970 Challenger Details - Cowl - 04/15/14 09:55 PM

Quote:

Hi guys, I'm looking to find variables on 1970 Challenger cowl sheet metal. Here is a pic of one example (383 RT/SE Los Angeles car). I'm looking for other picture examples to compare with. If you could post a picture (drivers side, same view as my pic), the original plant and engine combo I'd REALLY appreciate it!

Thanks!



Scott, my car is a 70 RT/SE LA, 383 car. I'll send you pictures in the next couple of days when I get it out of storage if still needed?
Posted By: ScottSmith_Harms

Re: 1970 Challenger Details - Cowl - 04/16/14 12:23 AM

Yes still needed thanks!
Posted By: 1971 Gran Coupe

Re: 1970 Challenger Details - Cowl *DELETED* *DELETED* - 04/16/14 01:30 AM

Post deleted by 1971 Gran Coupe
Posted By: moparfan

Re: 1970 Challenger Details - Cowl - 04/16/14 03:49 AM

Not sure this helps?

Attached picture 8114095-Kim'sChallenger028.jpg
Posted By: moparfan

Re: 1970 Challenger Details - Cowl - 04/16/14 03:51 AM

Its a NOE car

Attached picture 8114099-Kim'sChallenger028.jpg
Posted By: ScottSmith_Harms

Re: 1970 Challenger Details - Cowl - 04/16/14 04:48 AM

Thanks guys, The pics showing the whole cowl are not what I need, I need various close ups of the drivers side cowl where the pieces come together and are welded, just like the view in my photo. See that flat sheet metal piece on top with the two whitish drip marks leading down to the door hinge bolts? That's the flange I need pics of. Open the drivers door, look forward into the cowl, that's the area I need.
Posted By: moparfan

Re: 1970 Challenger Details - Cowl - 04/16/14 03:43 PM

I'll post it tonight when I get home from work.
Posted By: fastmark

Re: 1970 Challenger Details - Cowl - 04/18/14 03:14 AM

From my JH29N0B built on 9 17.

Attached picture 8116121-68chargerhornsandaircleaner015.JPG
Posted By: fastmark

Re: 1970 Challenger Details - Cowl - 04/18/14 03:15 AM

another

Attached picture 8116122-68chargerhornsandaircleaner018.JPG
Posted By: fastmark

Re: 1970 Challenger Details - Cowl - 04/18/14 03:15 AM

last one.

Attached picture 8116126-68chargerhornsandaircleaner019.JPG
© 2024 Moparts Forums