Bulkhead spades

Where can I get the female spade connectors that go in the bulkhead connector? I need the tool also. I have some ugly wiring problems on the Daytona and I have traced it to them. Thank you for your help.

These are Packard 56 terminals. If you only need a few you can go someplace like NAPA. You can remove them with a small pick. They have a tang that pops up. You push forward on the connector, then push the pick into the slot next to the connector from the outside, then pull it back. Get the new terminal first so you can see the tang, it will make it easier to understand. Find the correct gauge size for the wire you are attaching it to.

Look like: http://www.ebay.com/bhp/series-56-terminals

Michael
1968 Barracuda
Plano, TX

Napa part# is 725147.

http://www.napaonline.com/Catalog/Catalo...5147_0293960863

They are also available from Carquest. Boxes in pic below are from Carquest but I don't know which number they use.