Ebody heater switch panel

so im restoring my heater switch panel and a lot of the textured flat black paint is worn off, what paint should I use to restore this thing so it looks new?

Plasticoat #217 works great. Follow directions carefully. I don't have the can in front of me but if it doesn't say to, put the part in a 100 degree oven for an hour after spraying.

I sprayed the bezel with SEM trim black first...then masked off the center rectangle and sprayed VHT wrinkle paint. I set it out in the sun to wrinkle but you can use a heat gun to speed up the process.