Correct 1970 SHAKER scoop bolts for 6-pak.

Posted By: migsBIG

Correct 1970 SHAKER scoop bolts for 6-pak. - 12/15/13 11:13 PM

Friend is working on a correct shaker car scoop, but has some funky screws in place as to what should be there. Anybody have pictures of the shaker to base plate bolts/ screws that should be there? Where to get reproductions of those?

Posted By: shakerjoe

Re: Correct 1970 SHAKER scoop bolts for 6-pak. - 12/16/13 01:17 AM

these are the threaded screws for bubble to baseplate

Attached picture 7960106-shakerbubblebolts.JPG

Posted By: shakerjoe

Re: Correct 1970 SHAKER scoop bolts for 6-pak. - 12/16/13 01:20 AM

http://www.ebay.com/itm/70-71-Cuda-Chall...60c&vxp=mtr - quick ebay search...

Posted By: FJ5_Fish

Re: Correct 1970 SHAKER scoop bolts for 6-pak. - 12/16/13 04:10 PM

Frank Badalson has a lot of Shaker hardware available.

Posted By: migsBIG

Re: Correct 1970 SHAKER scoop bolts for 6-pak. - 12/16/13 08:11 PM

Thanks everybody.

Posted By: a12rag

Re: Correct 1970 SHAKER scoop bolts for 6-pak. - 12/18/13 01:48 AM

For those looking to "rob" more parts from a C Body, I believe that the bolts for the front grille on the 70 Newports, New Yorkers, and 300's are the exact same bolts . . . happy hunting !!! Of course, it is much harder today, than years ago, when going through the wrecking yards looking for this kinda stuff . . .

Cheers

Mark