26" Radiator Shroud Repros

Does anyone know if the 26" fan shrouds be reproduce fit the E bodies with the 340 sixpacks?

In any description I found it only mentions big blocks, so I was wondering if there is a difference either in the shroud itself or the mounting bolt holes.

same shroud with 26 inch radiators
2998326 still avail at any mopar dealer

I stock them btw

Thanks, and what about the correct mounting bolts?
Anyone know the right sizes and correct type?

The 26" radiator uses 5 special nut to attach the shroud. I have them in stock and I`m sure that Bill does as well.

It uses four small square clips that attach themselves to the radiator side brackets, two per bracket. Then you need four finely threaded bolts with very small hex heads(SEMS stamped on early 1970 model year bolt heads and a stylised "P" stamped on all later ones) and large washers to attach the shroud to the rad brackets You can get the NOS bolts(silver zinc plated) and clips from Roger Gibson. They are for all 26" E and B Body rads.

Quote:

---

Thanks, and what about the correct mounting bolts?
Anyone know the right sizes and correct type?

---

This is what was on my Dec built 1970 challenger

instock as well btw

#8 - 32 X 3/4"