Moparts

Package Tray / Trunk Divider 64 B-Bod Source / how to ?

Posted By: 1964Polara

Package Tray / Trunk Divider 64 B-Bod Source / how to ? - 07/18/12 10:52 AM



I need one of this for my 1964 Dodge in tourquoise. Some sources out there? Or can you do it by your own using the simple trunk divider as template? Which material had it OEM? cloth? And how is it attached?
Posted By: Savoy1964

Re: Package Tray / Trunk Divider 64 B-Bod Source / how to ? - 07/18/12 02:43 PM

http://www.hardensmcw.com/ListItems/SubCategory/Interior/Package%20Tray.aspx

Looks like they make them i have seen other companies that do also.
Posted By: Savoy1964

Re: Package Tray / Trunk Divider 64 B-Bod Source / how to ? - 07/18/12 02:47 PM

Original package tray was only on the top made of pressed board with a small piece going down the divider was separate and hooked into two tabs that go through the board. The tray was held down by two spring clamps with buttons on top color keyed to tray color. The one in the picture is custom made.
Posted By: sixpackbee

Re: Package Tray / Trunk Divider 64 B-Bod Source / how to ? - 07/18/12 03:55 PM

Contact Jim at Kramer Automotive. He has that type of tray/divider combo for the 64/65 Race Hemi cars.
Posted By: Dante

Re: Package Tray / Trunk Divider 64 B-Bod Source / how to ? - 07/18/12 07:11 PM

The one in your pic is for the Race Hemi cars and are specific for those cars only. I sell those as well but if you are planning on shipping to Germany you should know that is an expensive part to ship overseas.
© 2024 Moparts Forums