Posted By: cudaman1969
Hemi flywheel - 06/25/12 07:16 PM
What size flywheels where used on the 64-71 Hemi and the ring gear teeth
Hemi flywheel
Posted By: chromedome426
Re: Hemi flywheel - 06/25/12 07:30 PM
From memory I think 64-69 was an 11" & 172 tooth flywheel and 1970-71 was 10.5" & 130 tooth flywheel.
Posted By: domingo
Re: Hemi flywheel - 06/25/12 07:34 PM
Quote:
From memory I think 64-69 was an 11" & 172 tooth flywheel and 1970-71 was 10.5" & 130 tooth flywheel.
Posted By: JohnRR
Re: Hemi flywheel - 06/25/12 07:54 PM
Quote:Quote:
From memory I think 64-69 was an 11" & 172 tooth flywheel and 1970-71 was 10.5" & 130 tooth flywheel.
X3
Posted By: John_Kunkel
Re: Hemi flywheel - 06/25/12 10:18 PM
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
Posted By: cudaman1969
Re: Hemi flywheel - 06/25/12 11:10 PM
Quote:Quote:Quote:
From memory I think 64-69 was an 11" & 172 tooth flywheel and 1970-71 was 10.5" & 130 tooth flywheel.
That would explain why my aluminum bell is smaller than my blow proof (143),what a mess. Makes me wonder why I like mopar so much.
Posted By: Rhinodart
Re: Hemi flywheel - 06/26/12 01:58 AM
Quote:
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
Well that sucks, I just re-read the 68 Super Stock A-Body Authenticity Guide and it does say that the 68 cars used the 10-1/2" clutch. So misinformation out there, so what I did was to buy all the expensive 11" clutch stuff that I didn't need too...
Posted By: 6PakBee
Re: Hemi flywheel - 06/26/12 12:10 PM
Quote:
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
John comes through again.
Posted By: Rhinodart
Re: Hemi flywheel - 06/29/12 05:07 PM
Quote:
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
So what specific vehicles used the 172 tooth flywheel and 11" clutch, and which ones used the RC426 bellhousing and which ones used the STEEL bellhousing?
Posted By: B5 Bee
Re: Hemi flywheel - 06/29/12 06:00 PM
Quote:Quote:
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
So what specific vehicles used the 172 tooth flywheel and 11" clutch, and which ones used the RC426 bellhousing and which ones used the STEEL bellhousing?
AFAIK
all '66-'69 Hemis had the 172 wheel/11" clutch, except the '68 BO/LO
the STEEL was Maxie and '64-'65 Hemi
the RC will be of two types, '67 RO/WO with the 172 wheel, '68 BO/LO with the 130, I have one for a '67 as it has a 4.35" bearing retainer hole, I'm guessing a '68 will have a 4.80" hole.
Posted By: JohnRR
Re: Hemi flywheel - 06/29/12 06:48 PM
Quote:Quote:
I think you'll find that the '64-'65 Hemi (and the '68 race Hemi) used a 130-tooth flywheel with a 10 1/2" clutch.
So what specific vehicles used the 172 tooth flywheel and 11" clutch, and which ones used the RC426 bellhousing and which ones used the STEEL bellhousing?
68 and 69 B body would have the 172 tooth wheel, RC bellhousing would be a race Hemi thing , maybe the 67 SS B bodys ??? 68 A body ???
Posted By: Rhinodart
Re: Hemi flywheel - 06/30/12 12:53 AM
Acording to the Authenticity Guide for 68 L0/B0 the STEEL bell is the one that was used. The RC 426 was for the R0/W0?