Posted By: hemirdrnnr
Back of bumpers - 06/25/12 03:18 PM
Just got my bumpers back from Tri-city plating what is the best way to keep the back from rusting just paint them or what?
Posted By: wally426ci
Re: Back of bumpers - 06/25/12 03:50 PM
Maybe POR or I guess you could epoxy prime and top, etc.
Posted By: Eagleone1983
Re: Back of bumpers - 06/25/12 08:43 PM
another one vote for 3M undercoating but before I put that down I sprayed some epoxy primer.
Posted By: hemirdrnnr
Re: Back of bumpers - 06/26/12 01:44 AM
Thanks I appreciate the input!!!
Posted By: NANKET
Re: Back of bumpers - 06/26/12 06:25 PM
If they look good to you as they are then put clear over them, auto paint clear with hardener so it will last. Or epoxy prime in you favorite color. The undercoating sounds unattractive.
Posted By: DJVCuda
Re: Back of bumpers - 06/26/12 06:47 PM
I used POR 15 Clear about 15 years ago on my car and they still look great.
I did tape off the bumper holes & edges to avoid getting the paint on the front
Posted By: kielbasa
Re: Back of bumpers - 06/27/12 11:50 AM
Fluid Film......we'll see how it holds up.