70 Superbee lower valance trim piece screws

Posted By: MrNormsTA

70 Superbee lower valance trim piece screws - 06/03/12 06:23 PM

Anyone know the correct screws for the trim piece that goes on top of the lower valance? It is like the only screw not defined in my B body restoration reference manual book.

Thanks in advance, Rick.

Posted By: SixPackRT

Re: 70 Superbee lower valance trim piece screws - 06/04/12 06:28 PM

I was in that same position this last fall. Out of the few I pulled off, I never seen the same screws. I THINK (and thats a big THINK) they are the same as wheel opening screws from what I remember. Ive seen the larger pan head style trim screws as well. I will look at mine again tonight and see what I used. Hope that helps!

Scott

Posted By: gtx6970

Re: 70 Superbee lower valance trim piece screws - 06/04/12 07:05 PM

Only a guess on my part,,,,,, but the one on the right ?

Posted By: DPelletier

Re: 70 Superbee lower valance trim piece screws - 06/04/12 07:27 PM

The ones on the right are definitely correct for the WOM's and they are what I used on my valance trim.

Dave

Posted By: Cuda340

Re: 70 Superbee lower valance trim piece screws - 06/04/12 07:34 PM

Quote:

Only a guess on my part,,,,,, but the one on the right ?

Hey Rick,
I think I have some of those screws left over from my barracuda wheel openings if you need them.

Jeff

Posted By: big-block-dave

Re: 70 Superbee lower valance trim piece screws - 06/05/12 06:01 AM

My '70 Coronet 440 trim screws were definitely more like the ones on the LEFT. Maybe even a little more flange edge. Sold it and the screws awhile ago.