Posted By: blewbyu
69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 02:49 AM
I am looking at purchasing this 69 GTX and i would have thought that a GTX would have a 3speed wiper motor being it was a high end package car. Is it possible that it came with a 2 speed wiper motor? Here is a picture of the engine bay what do you think about the picture, does everything look correct? It looks like a 2 speed motor.
Posted By: Mr D21
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 02:56 AM
the coil wire is too long,,,
Posted By: Dougsmopars
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 03:35 AM
3 speed wipers were an option not standard.
Posted By: RoadRunnerJD
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 04:59 AM
It is very possible for a GTX not to have 3 speed wipers. A lot of cars without the airgrabber came wirh two speed wipers. The PCV valve and ballast resistor are not correct but that's nothing. Is it A4 platinum metallic? The A/C is a nice option with tinted glass all around. It has the factory tach. Can you post the fender tag?
Posted By: JohnRR
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 01:02 PM
Can you post a smaller low res picture , that will make it easier to spot what is not correct.
As said 3 speed is an option , it also has the wrong master cylinder cover.
Posted By: drmopar
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 03:00 PM
The master may be correct, the cap for sure is wrong. The B body mopars had to have power assist to get disc brakes. The A bodies past 1970 could get disc without power assist. And yes, J25 was optional on B body mopars, but standard on N96 equipped cars.
Posted By: LimeliteAero
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 03:07 PM
the master cylinder is probably a Wagner, Ive got one around here with the same lid.
Posted By: gtx6970
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 03:11 PM
ballast resistor, pcv valve, master cylinder cover,ignitiona coil should be green lettering
missing a voltage regulator?
a/c compressor pulley and power steering pump assy should be gloss black
Steering wheel center cap looks awfully dark ( maybe a 68 cap ? )
Shifter knob is chrome - should be woodgrain ( maybe an early car thing ?)
Posted By: Scatransit
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 09:41 PM
Shouldn't the engine be turquoise with A/C?
Posted By: RUNCHARGER
Re: 69 GTX Engine Bay, Whats Wrong With it ? - 04/16/12 11:13 PM
Nice looking car. A few wrong finishes and minor details, that wouldn't stop me from buying it.
Sheldon