1970 E Body N95 Steel Evaporator Line Question

Anyone know where I can find a source for the steel evaporator line that ties to the valve breather via a rubber hose for an N95 CA emission Cuda? It is the line that terminates near the firewall on the passenger side inner fender.

Fine Lines should have it.

Already talked with them. No luck and no recommendation.

I got everything I need for my 70 Ebody, N95 from Inline tube...

Quote:

---

Already talked with them. No luck and no recommendation.

---

Should be the same what is used on all '71's. I got fuel line set for my '71 Challenger from them last year and it included the vapor line that goes up the inner fender and connects to the breather cap by a hose. Only complaint I had was that their hardware kit did not include the clip and bolt that goes on the inner fender to hold the line in place, even though they told me on the phone their kit included it when I asked. Fortunately a Moparts member sold me a used one of those for an inexpensive price that I was able to clean up and use.