pic of correct color,70 runner factory jack

Posted By: meepmeep70

pic of correct color,70 runner factory jack - 01/28/12 02:53 AM

bought a great item,media blasted,now what is the correct color to paint,please? funny how these things were the norm on tire changing,just want to mount in trunk,thanks

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 04:04 AM

Dude,...you know you opened a can of worms with that question

...1970 B Bodies are screwy..

Usually "tube" jack is California, or St. Louis plant builds

OR

T post jacks are Lynch road cars.....most of the time

You know the "numbers" checkers will bag you at the shows

here's the 70 GTX/RR "T" jack, the hook # SHOULD BE 2931103

Attached picture 7040398-70B-bodyTjack.JPG

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 04:11 AM

Next one ain't pretty, but it's the 70 RR/GTX tube jack,....base should be black, the tube gold zinc plate, and the rachet and hook black, but I have seen rachets gray, but the hook always black on the tube jacks,....but again I'm sure there's variations, or different vendor supplies?

Mike

Attached picture 7040413-6997656-1970PlymouthJack.JPG

Attached picture 7040413-6997656-1970PlymouthJack.JPG

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 04:14 AM

don't forget this item either

Attached picture 7040422-jackbb.jpg

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 04:17 AM

This here is the DODGE 1970 B body (exc. Charger) only jack for comparison to see if you may have the "wrong" stuff

Mike

Attached picture 7040429-70coronet.JPG

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 04:26 AM

And if your missing the lug wrench....PEP boys has a really nice look alike for about $10...

and it's in the correct looking black finish too

Mike

Posted By: meepmeep70

Re: pic of correct color,70 runner factory jack - 01/28/12 04:54 AM

holy moly batman!

,Mike you hold way to much knowledge

thank you very much,i'll do my best then keep trunk closed

Posted By: mosweethemi

Re: pic of correct color,70 runner factory jack - 01/28/12 07:35 AM

Hello Here is a picture of our 1970 Road Runner Jack. http://s1100.photobucket.com/albums/g417/mosweethemi/?action=view&current=1970roadrunner320.jpg

Posted By: Tek52

Re: pic of correct color,70 runner factory jack - 01/28/12 08:34 AM

Hey folks! What does a Lynch Road produced, 70 Coronet jack setup look like? I'd imagining like a Charger, but, what about the bumper lift bracket, considering the odd "loopy' front bumper? Thanks!

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/28/12 11:26 AM

Quote:

Hey folks! What does a Lynch Road produced, 70 Coronet jack setup look like? I'd imagining like a Charger, but, what about the bumper lift bracket, considering the odd "loopy' front bumper? Thanks!

Lynch road builds are "usually" T bar style......this is the 70B Body DODGE jack, Coronet included

Attached picture 7040711-1970bbody.JPG

Posted By: meepmeep70

Re: pic of correct color,70 runner factory jack - 01/28/12 09:39 PM

wow,thank you Mike,i had no clue there was that much to them,differencing just from plant build,mine was lynch road.

Posted By: meepmeep70

Re: pic of correct color,70 runner factory jack - 01/28/12 09:55 PM

alright,i have ,surprisingly the correct style T jack,the hook is wrong(mine 2962 996) so i need to locate the correct hook,and that "don't forget this piece" the hold down i need to locate,with wing nut.who supplies these items?along with correct color paint? or are they going to come used?
thank you Darren

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/29/12 02:43 AM

Year One lists it,...although I'm sure others carry it,.....as far as paint, ehh, Krylon/Dupli-color,...it's just a jack, but if details is the name of the game, Totally Auto offers "jack gray"....the cast beam is dull silver

Mike

Attached picture 7041941-yo.JPG

Posted By: meepmeep70

Re: pic of correct color,70 runner factory jack - 01/29/12 02:47 AM

Thanks Mike,krylon dupl. color is fine as far as i'm concerned,thanks for the link to the yearone piece

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 01/29/12 03:01 AM

Here's some more jack stuff.......Have way too much on my puter,...Looks like you need that "funky" wrench too....Ahhh, gotta love 1970 B bodies

Posted By: meepmeep70

Re: pic of correct color,70 runner factory jack - 01/29/12 04:33 AM

thank you Mike

Posted By: Hemiruss

Re: pic of correct color,70 runner factory jack - 01/29/12 05:36 AM

Now Mike you've given more info.for my confusion...My 70 LA built Bee could have had either the t-bar of square tube...so now I'll show you my jack that came with my car.I got the car from orginial owner that bought it at Chiaroni Dodge in Sept.9 1970 in the Santa Rosa area...so here's a pic and maybe you can help.I've been told it might be an late 60's????
.....HELP....

Posted By: mosweethemi

Re: pic of correct color,70 runner factory jack - 01/29/12 08:34 AM

Hello Here is the jack thats in the picture with the yellow Road Runner above. Has never been painted or redone. This is the way it came.Its in my 1970 Road Runner Six Pack Car, Its a 1970 Jack!

Posted By: 70gtx440dana

Re: pic of correct color,70 runner factory jack - 01/29/12 09:46 AM

Quote:

Next one ain't pretty, but it's the 70 RR/GTX tube jack,....base should be black, the tube gold zinc plate, and the rachet and hook black, but I have seen rachets gray, but the hook always black on the tube jacks,....but again I'm sure there's variations, or different vendor supplies?

Mike

I have to challenge the black base and black ratchet and hook on 70 b bodies from St.Louis and LA. I own 2 B bodeis from St. Louis and one from LA and all the jacks are tube style with all gray components. I have yet to see any original 70 b body jacks from any of the 3 plants with black components. All I have seen are gray. On 69 earlier I agree with the black parts.

Posted By: blkbee6pack

Re: pic of correct color,70 runner factory jack - 01/29/12 03:28 PM

I do have a complete jack assy,. (tube) from a 1970 A body duster in very nice original paint and gold cad finish and it has black hook, base,and jack.

Posted By: hemi70se

Re: pic of correct color,70 runner factory jack - 01/29/12 04:19 PM

Mosweethemi,
That's a nice jack set up! How about some measurements for reference?
mast length?
hold down rod?
tire iron?

Posted By: mosweethemi

Re: pic of correct color,70 runner factory jack - 02/06/12 11:30 PM

Hello I got the measurements for the 1970 jack all but the rod .I will get it this week and add it on. Mast Lenght 34 5/8" long Rod Handle 18" to bend after bend 8 1/4 Thanks

Posted By: dragon slayer

Re: pic of correct color,70 runner factory jack - 09/26/14 02:17 AM

can some one post how the jack and the tire iron are installed properly under the tire? Thanks, G

Posted By: DPelletier

Re: pic of correct color,70 runner factory jack - 09/26/14 04:48 PM

Quote:

Now Mike you've given more info.for my confusion...My 70 LA built Bee could have had either the t-bar of square tube...so now I'll show you my jack that came with my car.I got the car from orginial owner that bought it at Chiaroni Dodge in Sept.9 1970 in the Santa Rosa area...so here's a pic and maybe you can help.I've been told it might be an late 60's????
.....HELP....

I've seen survivor '70 'Bees with that same jack (hollow tube with grey)...even Lynch Rd. cars.

+
Dave

Posted By: RJS

Re: pic of correct color,70 runner factory jack - 09/26/14 05:18 PM

1970 GTX F 60-15

Attached picture 8281754-P9100001s(Large).jpg

Posted By: JohnRR

Re: pic of correct color,70 runner factory jack - 09/26/14 06:53 PM

Quote:

1970 GTX F 60-15

My xray vision can't see thru your tire

Posted By: RJS

Re: pic of correct color,70 runner factory jack - 09/26/14 10:06 PM

Quote:

Quote:

1970 GTX F 60-15

My xray vision can't see thru your tire

I just followed the trunk sticker big boy!!!

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 09/27/14 12:14 AM

Quote:

can some one post how the jack and the tire iron are installed properly under the tire? Thanks, G

Depends on the year and vehicle?...what are you looking for?

Attached picture 8282110-jack.JPG

Posted By: dragon slayer

Re: pic of correct color,70 runner factory jack - 09/27/14 04:13 PM

Quote:

Quote:

can some one post how the jack and the tire iron are installed properly under the tire? Thanks, G

Depends on the year and vehicle?...what are you looking for?

I was asking for the 70 Road runner. The pic of the label have been too small to see the details. SO I was hoping for a pic of the jack and tire iron before the tire was installed.

I was curious if a rubber gasket or bumper is used in the hole of the bracket, and the exact orientation of the jack, and especially the tire iron. Is it held by the plate, or pressure of the tire.

My car did not originally come with the parts, which I have recently acquired. Thank you, G

Posted By: wesgtx440

Re: pic of correct color,70 runner factory jack - 09/27/14 05:48 PM

Here is a link from a past Moparts post regarding correct colors.

https://board.moparts.org/ubbthreads/show...rue#Post7646215

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 09/27/14 06:00 PM

Quote:

Quote:

Quote:

can some one post how the jack and the tire iron are installed properly under the tire? Thanks, G

Depends on the year and vehicle?...what are you looking for?

I was asking for the 70 Road runner. The pic of the label have been too small to see the details. SO I was hoping for a pic of the jack and tire iron before the tire was installed.

I was curious if a rubber gasket or bumper is used in the hole of the bracket, and the exact orientation of the jack, and especially the tire iron. Is it held by the plate, or pressure of the tire.

My car did not originally come with the parts, which I have recently acquired. Thank you, G

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 09/27/14 06:01 PM

Quote:

Quote:

Quote:

can some one post how the jack and the tire iron are installed properly under the tire? Thanks, G

Depends on the year and vehicle?...what are you looking for?

I was asking for the 70 Road runner. The pic of the label have been too small to see the details. SO I was hoping for a pic of the jack and tire iron before the tire was installed.

I was curious if a rubber gasket or bumper is used in the hole of the bracket, and the exact orientation of the jack, and especially the tire iron. Is it held by the plate, or pressure of the tire.

My car did not originally come with the parts, which I have recently acquired. Thank you, G

70 Road Runner

Attached picture 8282613-jack.JPG

Posted By: dragon slayer

Re: pic of correct color,70 runner factory jack - 09/27/14 06:38 PM

Thank you, unfortunately still can't read the details. G

Posted By: DAYCLONA

Re: pic of correct color,70 runner factory jack - 09/27/14 10:28 PM

Quote:

Thank you, unfortunately still can't read the details. G

You'll need a jack decal for your car anyway,....buy one from Performance Car Graphics.com

PN# 2931182 then you can

Posted By: 70440+6bbl

Re: pic of correct color,70 runner factory jack - 09/30/14 04:16 AM

Anyone have the length of the spare tire hold down rod from a '70 B-body?

Posted By: dragon slayer

Re: pic of correct color,70 runner factory jack - 09/30/14 03:37 PM

About 9 1/2 inches. G