Moparts

How to AutoBody Videos

Posted By: GwaiiEagle

How to AutoBody Videos - 01/22/12 08:24 PM

Is there a good series about this?

Please don't say Youtube because I am not finding a thorough series on the Tube.

The Duster's rust in the quarter panels is pretty bad in spots (inner and outer on one side)

Not wealthy or I'd just pony up for a rolling chassis.

Don't live anywhere near where courses are offered or I'd just do that.

Not looking for concours restoration just a car that is not rusting away.

Pretty much all the panels should be redone to some extent and the doors are not without little dings.

Posted By: 68HemiB

Re: How to AutoBody Videos - 01/22/12 08:38 PM

Not sure if this thread belongs more in Restoration or Q&A - that is an issue for a moderator to decide.

What is certain is that you should start a thread in ONE forum, not the same one in multiple forums.

Posted By: White440

Re: How to AutoBody Videos - 01/22/12 09:01 PM

http://www.badasscars.com/index.cfm/page/ptype=results/category_id=25/home_id=25/mode=cat/cat25.htm

I cant seem to find much for reviews on these but was thinking on giving them a try myself
Posted By: DynoDave

Re: How to AutoBody Videos - 01/22/12 11:23 PM

Quote:

http://www.badasscars.com/index.cfm/page/ptype=results/category_id=25/home_id=25/mode=cat/cat25.htm

I cant seem to find much for reviews on these but was thinking on giving them a try myself




One of the folks on that site looks like Kevin Tetz.

Eastwood sells a bunch of his videos.

Eastwood
Posted By: White440

Re: How to AutoBody Videos - 01/23/12 02:14 AM

looks like the same set and about $35 cheaper
© 2024 Moparts Forums