For Sale - Elephant Hemi Engines - 1st Quarter

Hemi crossram and restored 3116 holley carburetors. I think the manifold is a A@A 4600$ cash. Lexington nc

For sale is an NOS A9 dated 4619S Hemi front carb. This carb is in near perfect condition. Original tag in place. It has never been bolted to an engine or fuel in it. There is no original box with this carb. These do not come up for sale often anymore. Buyer pays shipping or arrange pick up. $3k PM me here. Thanks.

3 center Main caps for Hemi or Mega block. These are made of steel and are unused and will need to be finished to fit your block.

$300+ Shipping

Please PM if interested.
Allan G.

New unused intake manifold, $400. P4532784.
Or, will trade for a 440 Performer RPM intake, Edelbrock 7193.
425-287-4386....cell

2 original 1969 Carter AFB carburetor tags front 4619s 2838 date rear 4620s 3098 date. $200 free shipping.

NOS hemi heat tubes with part number label still intact.

$1,000 obo

Thanks!

B body hemi k member. Powder coated black
Dated 0109. 10th day of 1969

$1,500

Thanks!

1966 to 1971 426 HEMI harmonic balancer, original, not reproduction, not cracked in the keyway area $750.00 (708) 288-2879

1 set of original 426 HEMI connecting rods, as you can see in the pictures the side beams have been polished, new bronze bushings on the pin end $400.00 for the set (708) 288-2879

for sale: nice original black wrinkle 1970-71 426 Hemi valve covers, $2000.
email: ebodycab@msn.com
Phone: 818-426-8685

for sale: nice original black wrinkle 1970-71 426 Hemi valve cover, RH passenger side only, $1000.
email: ebodycab@msn.com
Phone: 818-426-8685

1970 426 HEMI oval air cleaner base plate, original not reproduction, I do not have a lid, this is the base plate only $1850.00 (708) 288-2879

66-69 chrome dome base plate. Very clean condition. No hacking or grinding in any areas. Been sitting for decades needs to go to someone who can use it. Crusty air filter is included at no cost. What a deal!!
$575 includes shipping to your front door, anywhere in the contiguous 48. I DO NOT accept Paypal. Payment to be made with postal money order of personal check.
Located on the Phoenix metro area.
Thanks,
Chris

1 Pr. 1966 to 1970 B- body 426 HEMI motor mount brackets, original not reproduction not cut or modified, nice used condition $450.00 for the pair ( 708) 288-2879

These are virgin Brodix castings, similar to the D-6 heads from Chrysler, 11/32 guides, no valve job or port work ever.

$2500

PM here for more info or pics

Posting for a friend. He has a pair of Twin Plug Aluminum Hemi Heads that have had some work to include 2.350 Int and 1.935 Exh valve job SS valves included (9 Int and 9 Exh). Bronze valve guides and some porting is evident. They have been sitting on the shelf for some years. He is asking $3,000 plus shipping from Callahan, Florida. Please contact Gary Johns at 904 388-8808. Best days to contact are Tuesday, Wednesday or Thursday bet. 9A - 5P. I can provide photos if you PM me an email address.

1970 & 1971 426 HEMI intake manifold, NOS, never been bolted to an engine $1200.00 (708) 288-2879

Have some used single 426 Hemi stock rods and single race pistons. Stock length, bushed 1.03" pin ends, some with SPS bolts and a couple of single pistons if anyone can use them. Both high dome - (1) Venolia and (1) TRW, both +.030 @ 4.280" bore. Also New set of Direct Connection P4120635 Hemi 5/16" lash caps.

Rods $25 each mix and match ***********Pending*******

Pistons $15 each Good wall art or trophy build?

Lash caps $20 *********SOLD***********

All parts + ship

PM for more pix

Basically perfect shape, std/std journal sizes, Mopar rod journal, not chev.
8-bolt flange, knife-edged weights.
$2500
I will take as many pics as you want.
425-287-4386....cell

FOR SALE 1968 Mopar Hemi distributor IBS 4014A-38-8 Chrysler 2875140. Completely rebuilt/restored to factory specifications. New points and condenser, new vacuum advance unit, new correct lead. no expense spent. Completely detailed. comes with all paperwork from Halifax Shop. Price $850.00 shipping included in price Bob Horman

Not parting out or splitting engine or trans.
$25,500 picked up in York,Pa 17408

484 Hemi and trans specs
no carburetor
484 Street Hemi
Mopar block cast number 2468330-M
Pre-"World' iron block (2008)
4.15 stroke Eagle crank
4.310 (+.060")
10.25 to 1 Icon forged pistons
RPM rods
Edelbrock Hemi heads
.620 Comp roller cam & lifters
Barton 4150 single plane intake no carb
12qt Aluminum oil pan
Milodon oiling system
will run on pump gas
727 automatic trans
J convertor,
full manual valve body
deep trans pan
10.20's at 132mph in a 3000lb Barracuda
4 runs on fresh setup
$25,500 picked up in York,Pa 17408 (717) 577-0270

1970 426 HEMI 4-speed distributor OEM concourse restored
No excuses, ready to run. Fully rebuilt & restored. Tuned and setup by Joe's distributor.
New points
New condenser
New wire lead
New cap & rotor
Rebuilt vacuum advance

Ready to run, set initial timing to 18' perfect OEM concourse

SOLD SOLD SOLD

1966 to 1969 426 HEMI chrome dome air cleaner base, lid and filter, the filter element is used original not new $1500.00 for everything (708) 288-2879

One Pr. 1970 & 1971 426 HEMI valve covers, original not reproduction, they have been stripped to bare metal and the restoration has begun, as you can see in the pictures it needs to be finished, selling as is $1500.00 (708) 288-2879

Steel Stage V air lid for your Hemi's. Made in U.S.A 155.00 plus shipping

One more time, 472 crate hemi built by Moran Racing of Taylor Michigan. If you're not familiar with Moran, they build big HP/high-dollar engines; this one is neither, just a 472/579 hp street engine. As-built, it was topped off with a Big 3 EFI set-up for E85 fuel. I recently removed that and installed a new Stage V Engineering 'Rat Buster' 2x4 inline with 2 rebuilt 600 Edelbrock carbs as there seems to be more interest and desire for the old-school look. $24K firm, located in Southern Tennessee. If interested, PM me here for info and details. Thanks for viewing, much appreciate

Mint original, with new cap/Rotor. Part# 28775327. I believe MoPar Performance item. $550 shipped. lafrancebiglou@aol.com

An original 426 Hemi fuel pump, 4024SA. date code B-7. Restored and rebuilt by Brian Brady using NOS internals. Comes with the original style fittings as shown (over $100 just for the fittings).

$700, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original 426 Hemi alternator pulley, part number 2095059. Reproductions list at $95.

$90, plus shipping. I'm never offended by offers. TWSchuler@aol.com

An original 426 Hemi balancer. Well used. Can the holes be re-welded, that I don't know.

***SOLD***, plus shipping. I'm never offended by offers. TWSchuler@aol.com

Ive got a Brand New set of Edelbrock 61175 Victor Jr CNC Cylinder HeadChrysler 426-572,these are set up for hyd roller cam,new in box,looking to trade for some 426 hemi parts,looking for a duall carb set up,either crossram with carbs or inline with carbs ready to run,let me know what you have,also may be interested in some high end rocker gear,barton,stage v,let me know if there is any interest,john franklin fall river wi bogbaits12345@gmail.com,im hearing impaired so text or message works 9202109320

426 Hemi crankshaft. I got this with a recent parts purchase, haven't had it checked. Needs a polish.

$300

Thanks