For Sale - Elephant Hemi Engines - 4th Quarter

Posted by: moparts

For Sale - Elephant Hemi Engines - 4th Quarter - 09/30/17 09:52 PM

up
Posted by: 938-DAN

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/01/17 09:13 PM

For Sale:

Pair of original 426 Hemi exhaust manifolds. Dated October and November of 1966. Very nice condition but heat riser has been removed and holes plugged and passenger side manifold has a crack in the flange area that will need to be repaired. Price is $700.00 for the pair including shipping within the continental US.

Please email with questions or for more pictures ASonn86814@aol.com .
Thank you.
Posted by: 938-DAN

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/01/17 09:16 PM

For Sale:

1969 426 Hemi engine and matching manual transmission from a 1969 Dodge Coronet R/T WS23J9. Block casting date 6/10/68, cylinder heads dated June 18 and June 26 of 1968. Good used cores for a 1969 B body hemi project.

I have the assembled long block with intake manifold, oil pan, heads, rocker arms, valve covers, water pump and balancer. I also have the heavy duty 18 spline four speed manual transmission with matching VIN number and the correct cast bell housing.

Cylinder heads and oil pan were removed for visual inspection. No damage or excessive wear observed. Engine retains the original factory standard pistons #2780514 and #2780515. Combustion chambers in heads are clean with no pits. No sludge, no rust, no corrosion and the engine turns over easily by hand. This is a really nice core engine.

I DO NOT have the carburetors, exhaust manifolds, distributor, pulleys, fan, flywheel or starter.

This is not the typical collection of mismatched leftover parts, it is a complete long block and matching transmission as removed from a vehicle. No visible damage but it does appear to have been in storage for a long time and will need to be gone through. Selling the package for $18,500.00. Must be picked up in southern New Jersey, zip code 08096. Please email ASonn86814@aol.com .

Thank you.
Posted by: johnnyd

Hemi valve cover gaskets - 10/02/17 01:07 PM

2 Sets Hemi valve cover gaskets $35 for both sets NOS Mr. Gasket 374 SOLD!!! Thanks MOPARTS!
Posted by: Dragula

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/03/17 08:46 PM

$25k price drop.

This is the last time the Callies crank can be turned, and so I am lowering the price. Engine is almost back together and you can hear it run as I am putting it back in the car

All aluminum Indy style Hemi parts purchased from BGR. Complete 1250 carb to pan minus motor plate. I currently have it all apart as we have nearly fixed the last remaining issue from last year. This engine makes over 800hp on pump gas and is an absolute street terror.

Last year I did window it after starving #7 rod bearing for oil. The block was professionally repaired and is currently out for a final line hone just to make sure nothing moved. All parts that were hurt were replaced or repaired professionally.

All good parts, 11.2:1 compression. Heads ported and flowed..all build specs here...Should have it all back together here in a few weeks. Can hear it run in a few weeks as it will back in the car.

May take a 6.1 Hemi stroker and $$$ in trade...

All build specs here
http://board.moparts.org/ubbthreads/ubbt...ld-updated.html

Very Streetable:
https://www.youtube.com/watch?v=WYw6RA-k5Bk&t=37s
Posted by: 70HemiGTX

Hilborn Fuel Injection - 10/04/17 04:57 AM

SOLD. Thanks Moparts.
Posted by: 67R/T4speeder

572 Race Legend new - 10/04/17 11:29 AM

part# 426-c6-572-960
In the crate

$21,000.00

zip 93433

troxellsgarage@gmail.com
Posted by: 70HemiGTX

Hemi race weight valve covers - 10/04/17 06:45 PM

For Sale: Hemi dual plug light weight aluminum valve covers. Very nice condition. I polished them. What you see is what you get. One full set of single hole block-offs. One full set of twin plug block-offs. 4 new breathers. They are ready to bolt on. $600 shipped to the lower 48. Email me at: trdeppen"at"comcast.net or pm me here.
Posted by: HemiGreg

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/12/17 04:17 PM

Hemi factory blocks std,+30,+60
all never hurt 66,68,69,69,the 69s are unstamped
$4500-6000 pickup only li.ny 11783
5167817653 leave message
Posted by: old_racer

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/14/17 01:01 PM

new in box mopar perf crossram intake never mounted. $625.00
email for pic's
hemimax@hotmail.com
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/14/17 02:46 PM

One set of 426 HEMI rocker assemblies, Everything aftermarket for a Top Fuel or Alcohol aluminum type head, Stage V roller tip intake rockers $2000.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/14/17 03:06 PM

One set of eight 426 HEMI Stage V roller tip intake rockers in excellent used condition $750.00 for the set (708)288-2879 Scott
Posted by: 70HemiGTX

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/18/17 05:39 PM

For Sale: I have 3 Hemi valve covers.

1. Chrome Direct Connection 70-71 passenger's side valve cover. Very nice condition. Has spark plug loom. Never had the wireloom tabs. No dents. $400 shipped to the lower 48.

2. Chrome 70-71 passenger's side valve cover. Ok condition. Has spark plug loom. Wireloom tabs are missing. $300 shipped to lower 48.

3. Chrome 69 and earlier valve cover. Chrome is nice. Had a hole drilled in the backside of the valve cover. Has an AN plug in it. What for????? ******SOLD********


Email me at: trdeppen"at"comcast.net or pm me here or call 7one7-five71-518zero.

Thanks for the ad.

Posted by: shorty

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/20/17 09:13 PM

1969 426 HEMI, Mostly Complete with Perfect Never Any Damage or Cracks Block, Hemi Crankshaft 2780533, Super Nice and Complete Cylinder Heads with all Valve Train, Racer Brown Solid Cam & Lifters. NO Intake or Carbs.

Block has VIN # XS29J9BXXXXXX with casting date 8/5/68

Block is .40 over

Cylinder Heads - 2780559 with F/28/8 & G/30/8 Codes

The block still has perfect cross hatch pattern in bores from prior rebuild many years ago and never used. Pistons, Rods and Oil Pan removed by previous owner for another application. Cam is .544(I) .527(E) Duration 254 @.050

Contact : red_srt10 at @ yahoo.com OR PM on Site

$17,500
Posted by: Little Detroit

1970 426 hemi engine - 10/21/17 11:19 AM

1970 426 hemi engine with all machine work completed and all new parts for assembly. casting date is 11/11/68 out of 70 hemi cuda which still survives today. block is .020 overbore ,block squared, line bored, cam bearings and brass soft plugs installed, rods resized and rebushed with arp rod bolts installed, pistons are .020 hyper eutectic 10.25 comp, rings are sealed power already file fit to cylinder, crank is 10/10, engine assembly is balanced, new melling high volume oil pump, bronze dist bushing, bronze distributor drive gear,cams shaft is Racer Brown "cheater " hyd cam and springs with lifters, heads are virgin with the exception of gasket porting,5 angle valve job and springs set at appropriate height for camshaft ,correctly dated intake manifold, 1970 4 spd carburetors date matched, felpro gaskets, spring return brackets and springs,arp head bolts and studs ,original 70-71 valve covers. if you are want a great engine to complete your 1970 hemi car this should fill your needs. the engine has left apart for your inspection as stated earlier all parts are either reconditioned or new in their perspective boxes. $30,000.00 or best serious offer,some trades possible. 304 797 0607 thank you.
Posted by: Little Detroit

Re: 1970 426 hemi valve cover - 10/21/17 11:25 AM

1970-71 valve cover one only. $ 300.00 304 797 0607
Posted by: Steve1118

New Diamond Hemi pistons - 10/21/17 04:22 PM

For sale, +.060 Diamond Hemi pistons. 4.31 bore, 4.15 crank, 1.03 pin, 12.1 to one compression. Brand new, still in box, never even unpacked except to look at one. $700. Bought to put together a stroker motor, but never got around to it and now, in my mid sixties will stick with 426 size motors for NSS racing, so this stuff is laying around. 814-288-9924
Posted by: 938-DAN

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/23/17 02:45 PM

For Sale:

Matched set of carburetors for 1971 426 Hemi engine with manual transmission. Front is 4742s dated ML9; rear is 4745s dated ML9.

Rear carburetor mounting flange was repaired. Repair appears to have been professionally done; will not affect fit or function and will be difficult to see when installed.

Nice set of cores to rebuild or restore. Price is $4,000.00 for the pair; shipping within the continental US included. Please email with questions or for additional pictures ASonn86814@aol.com .

Thank you.
Posted by: ScottSmith_Harms

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/24/17 07:20 PM

Hey Greg, any chance you can call me? 801-940-2689 Thanks, Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:10 AM

Vintage Donovan gear drive for big block Mopar and 426 HEMI, I do not have the cam gear or the crank gear, what you see in the pictures is what I have $275.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:27 AM

One pair of 1971 426 HEMI 4-speed carbs, front carb ML9 4742 rear carb ML9 4745, excellent cores to restore $5500.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:33 AM

1970 426 HEMI front carb date code C0 4742 excellent core to restore $2500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:40 AM

NOS 1970 and 1971 E-body and 1971 B-body drivers side motor mount insulator not repro, never been installed on a car, part #2951599 $475.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:45 AM

1970 426 HEMI rear carb #4746S, date code H9 for cars with automatic transmission, excellent core to restore $2500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 01:50 AM

One pair of original "not reproduction" 1970 and 1971 426 HEMI valve covers that have been chrome plated, as you can see in the pictures the drivers side valve cover has had some repair at the back end $650.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 02:14 AM

Late 1969, 1970 and 1971 426 HEMI 2X4 inline intake manifold, as you can see in the picture it has had a repair on the bottom side, other than that it is in excellent condition $500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 02:22 AM

Late 1969, 1970 and 1971 426 HEMI 2X4 inline intake manifold, as you can see in the picture it has had a repair on the bottom side, other than that it is in excellent condition $500.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 02:27 AM

NOS 1971 426 HEMI "B" and "E" body oval air cleaner base plate, never been installed on a car $1850.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 10:01 AM

1967, 1968 and 1969 426 HEMI direct drive starter for cars with 4-speed transmission, rebuilt, ready to install $750.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 10:10 AM

One pair of brand new 1966 to 1969 chrome 426 HEMI valve covers, never been installed on an engine $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 10:14 AM

One set of 426 HEMI Crossram linkage, Jegs and Summit price $407.97 my price $300.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 10:16 AM

1966 to 1969 426 HEMI chrome dome air cleaner lid and base plate, the lid is still wearing it's original chrome plating and it is old and tired, I would call this driver or survivor quality, to be show quality the lid would need to be rechromed $650.00 for the base plate and lid (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 10:20 AM

One set of 1966 to 1969 426 HEMI rocker assemblies, narrow pad, nice used condition $1450.00 (708)288-2879 Scott
Posted by: rickseeman

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 11:39 AM

Crank trigger bracket from the 70's $75 prefer paypal Rick 501-519-7425
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 04:30 PM

Edelbrock 426 HEMI 2X4 inline Rat Roaster intake manifold, excellent used condition $550. (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 04:56 PM

1968 and 1969 426 HEMI prestolite dual point distributor, part #2875140 IBS4014-A date code 52 7, I have installed a new lead wire and I have tested the vacuum advance, it pulls, excellent used condition $850.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 04:57 PM

1969, 1970 and 1971 NOS 426 HEMI water pump pulley, never been installed on a car, part #2946716 $350.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 05:08 PM

1969, 1970 and 1971 426 HEMI oval air filter NOS in the box, this is the real deal, never installed on a car $650.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 05:12 PM

Mopar Performance single 4BBL, single plane intake manifold for a 4150 style carb, excellent used condition, part #P5153781 $550.00 (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/29/17 05:32 PM

Vintage OFFY dual quad tunnel ram for 426 HEMI nice used condition, it has had some mild port matching $250.00 (708)288-2879 Scott
Posted by: rickseeman

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/30/17 01:58 PM

NOS 426 Hemi crankshaft stock stroke I bought this around 12 years ago. I think I paid $1,350 for it. $800 prefer paypal Rick 501-519-7425
Posted by: rickseeman

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/30/17 02:07 PM

8 matched Chrysler 426 hemi rods. Big ends sized. Nice. $300 prefer Paypal Rick 501-519-7425
Posted by: RoadRunner

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/30/17 02:36 PM

Pistons, set of eight. Mopar Performance P5007075, new in the boxes with pins. I somehow acquired these years ago when I first starting thinking about putting a Hemi together. Well, the engine has been done and in the car for a year. So I don't think I am going to use these ever.

Specs are:
4.5" diameter forged aluminum (use on aftermarket blocks with 4.5" bore)
1.031 pin diameter
1/16" x 1/16" x 3/16" ring set thickness


Asking $250 for the set plus shipping. Parts located in the Buffalo NY area. If you have any questions PM me here at Moparts.
Posted by: gtea1901

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 10/30/17 02:49 PM

used Mopar Performance 426 Iron Hemi Dual Plug Heads complete with valves and springs. $2000.00



Call Denny 717 676 3349
Posted by: kyhemi-dart

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/01/17 09:53 AM

Charlie’s aluminum oil pan with tie rod hole SOLD!

NHRA 6.86 Oliver SS rods for 2 inch crank journal have 9. $600

Old Super stock hemi valve covers $200


Sean 270-401-8825
Posted by: dsd70bee

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/01/17 11:27 PM

426 HEMI single 4 BBL. intake manifold taken off a crate HEMI, excellent condition. $375.00 (708)288-2879 Scott
Posted by: Big Squeeze

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/02/17 09:52 AM

Hemi mega-block for sale...4.533" bore with domed Wiseco pistons (we used a 4.500" stroke crankshaft)...10.763" deck height...with these pistons, block clearance is 0065"-.007"

I found this block listed on Moparts and had a customer of mine buy it for a future build from Brewer's Performance back in January of 2012...He never indicated there was any kind of issue with the block...I asked why he was selling it and all he said was that he was going to an aluminum block for the weight savings...He told us it was freshly machined by Best Machine so we measured it and ordered a rotating assembly...

Fast forward to early this year and we get the 13.6 to 1 engine together and running...The combo makes an honest 800HP....The customer has about ten hours run time on it and we decide to change the oil when we find antifreeze in the oil, so we pull it apart and find cylinder #3 is cracked...The block gets sent to Motion Machine in Danville, VA where they find that cylinder #3 has already been sleeved before, so he removes the sleeve and finds a huge hole in the block right where the sleeve had cracked (sure would have been nice if Brewer would have been honest and up front about that)...so, it now has a .147" sleeve instead of the .130" it had...The block will hold approximately 550-600HP at MOST with this thicker sleeve, so if you need a good, blue printed block for a mild build, this will work fine.

You'll get the block, pistons, new file-to-fit rings and Cometic head gaskets.

$4,000

If you want to run pump gas, you can cut the domes down and with stock length rods, the piston will be .040" farther down in the hole from where we had it.

The block is currently in Danville, VA at Motion Machine and will ship from there.

Call Ralph at 918-698-5899 or email me at afxplymouth@sbcglobal.net for pics if you're seriously interested.
Posted by: Transman

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/06/17 06:20 PM

For Sale - brand new Direct Connection 12.5 to 1 race pistons, dykes top, 1/16" second. With pins and locks in original boxes. Two sets available. $400. / set plus shipping. PM if interested.
Posted by: RR J

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/06/17 11:37 PM

HEMI round air cleaner. Recromed top, KN filter, edelbrock @ stock base.
$1400 or offer.

HEMI motor mount new. Bracket black PC, new rubber mts $400

HEMI Sanderson shorty headers $275

Misc. Hemi push rods. $75 per set

HEMI 66-69 6qt. pan @ 1/2 in PU $250

All items plus shipping

PM or call 218 626 5223
Posted by: H4E2M6I

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/08/17 08:12 PM

426 Hemi Magnesium blower intake manifold for th 6/71, 8/71, 14/71 superchargers, NOS and in perfect condition. $800 Calls only 815-218-1733
Posted by: gdmusclecar

426 hemi parts for sale - 11/09/17 09:39 AM

70-71 426 hemi heads bare,no cracks,decked on intake rail $1,650 set

426 hemi rocker arms set complete $1,650

nos 426 hemi oil pickup $75

nos 67 426 hemi rear carburetor $2,800

66-67 426 hemi 4spd bellhousing $1,400

66-67 426 hemi carburetors $2,250 set

68 426 hemi distributers (2) $695/$795 each

426 hemi magnesium crossram intake "original" $3,500

nos 426 hemi heat tube set $1,195

70 426 hemi rear carburetor $2,500

71 426 hemi front carburetor $2,500

66 426 hemi complete and rebuilt on engine test stand."ready to drop in"can hear run before purchase. $25,000

much more call or email for needs..

orange park,fl.

e-mail: gdmusclecarparts@yahoo.com

shop # 904-272-1803

cell # 904-589-4645
Posted by: JRepucci

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/10/17 05:21 PM

1970 1971 426 HEMI Exhaust Manifolds $7500
Posted by: sixpackbird

Hemi Carb 4139S - 11/13/17 08:55 AM

SOLD - Thanks Moparts

Hemi Carb 4139S with a January 1966 date code. I only have this one carburetor.
Posted by: jcc

Hemi Pistons - 11/13/17 10:46 AM

Set of 8 New Hemi MP Pistons with pins/locks $200 +shipping/packing from S Fla PM

Sale pending
Posted by: jcc

Hemi Hiborn Injector manifold/stacks - 11/13/17 03:30 PM

Used Hilborn Mechanical Hemi Injector manifold, 2 7/16", as is, as pictured, with 8 chrome stacks w/slight pitting, K/N style used filters, no plumbing, ships from SW Fla, $500+ shipping/packing payment within 7 days PM
Posted by: JRepucci

Re: For Sale - Elephant Hemi Engines - 4th Quarter - 11/15/17 02:26 PM

Mickey Thompson Street Hemi Valve Covers $1500
Posted by: gdmusclecar

66 426 hemi engine - 11/16/17 07:53 AM

I HAVE AN ORIGINAL 66 426 HEMI,I ALSO HAVE THE CHROME DOME AIR CLEANER,ITS COMPLETE AS PICTURED AND IT IS ON AN ENGINE TEST STAND SO YOU CAN HEAR IT BEFORE YOU BUY IT,ITEMS NOT INCLUDED IN SALE ENGINE TEST STAND,H-PIPE,BELLHOUSING,FLYWHEEL,ITS COMPLETE AND DATE CODE CORRECT,IT HAS BEEN REBUILT,BLOCK DID HAVE SOME REPAIR,THIS IS A GREAT ENGINE FOR A DATE CODED HEMI CAR.FOR FURTHER DETAILS YOU CAN CALL US.

$25,000

ORANGE PARK,FL.

E-MAIL: GDMUSCLECARPARTS@YAHOO.COM

SHOP# 904-272-1803

CELL# 904-589-4645