ForSale / Wanted - Tools/ Equipment/Trailers - 1st Quarter

looking for a 48 to 52 ft enclosed trailer with living quarters. Have a 2019 28 ft Diamond to trade . PM here thanks Birdtracker

For sale. 38’ Pace Shadow enclosed gooseneck trailer. It’s a 2007 model that very little usage. It has always been stored inside my shop. It has no hail damage or other damage. It was pulled mostly to the local track for my jr dragsters. We bought a Toy Hauler type in 2008 so this has very little use. It made a trip or two hauling furniture when the kids moved and it has stored furniture for the 5 years still in my shop. It’s red outside and completely finished inside with white aluminum walls. It has 12’ of red cabinets. It has a clothes wardrobe, upper cabinets and aluminum countertop. It has a generator compartment and wiring but I never installed a generator. It is wired for 50 amp service. It has one roof ac but had wiring for the second ac as well. It is completely wired inside and out for 120 v lights and plugs and inside 12v lights. It has an electric over hydraulic tongue jack plus the original manual jack. It has a generator compartment and wiring but I never installed one. Axles are two 7000 lbs with 16’ chrome wheels. The trailers has no rust and has never been pulled outside of Texas.
$32,000
As an additional note. Since the trailer is tucked tightly inside my shop, I cannot wash the outside. It does clean and polish up nicely. It is not faded from the sun just not washed from the last time I pulled it in a rain. Weather and time constraints are preventing me from cleaning it up right now. It is very hard to get it in and out of my shop right now.
Mark Faught
Abilene, Texas
325-669-4941

RB & SB plastic mock up motors, no short blocks. THX

Used Auto Lift CR 3000 Rotisserie with the front and rear brackets for an E-body
1500 OBO located in SOCAL possible delivery
sorry about the pic
somerbr1@aol.com

Have a new never opened Caswell 1.5 gallon Copy Cad&zinc plating kit with additional yellow chromate solution. Kit comes with buckets air pump and manual as well as everything needed to re plate your hardware and brackets. I will do $200 shipped to lower 48 via UPS. SOLD

Wanted: Whirly Jig or compatible 68-70 B body body cart. email me at: trdeppen"at"comcast.net or pm me here. Thanks for the ad!

3M™ Random Orbital Sander - Elite Series 28502, 6 in Central Vacuum5/16 in Orbit. New in box never used. Hook it up to your shop vac or vac system and no more bondo dust or sanding dust. I use them in my garage and would never go back. $225 shipped lower 48.​