For Sale - Race Parts - 4th Quarter

Posted by: moparts

For Sale - Race Parts - 4th Quarter - 09/30/17 09:56 PM

up
Posted by: 440W8 Duster

JW Trans powerglide - 10/01/17 01:49 AM

I have a JW trans Ultra Case Ultra Bell Roller tail shaft with 8in stalls at 5400 UCC converter with flywheel for a Small Block for sale or trade has Pro Brake 1.80 straight cut gears asking $3000 or
trade for a 904 or 727 with pro brake billet front drum and 8in converter with similar stall and a CSR fiber shield plus some cash my way.
Posted by: DaKuda

Small Block Mopar Top end NEW - 10/01/17 09:32 AM

$3500

OPEN TO TRADES FOR....?

Sold my car so I don't need. Only reason for selling.

Small Block Mopar Top end. 

All parts bought new from Marsh Performance. 
All port work done by Larry Smith....well know Mopar cylinder head porter.

Everything is Brand new unused in boxes.

1. Sidewinder aluminum heads
2. Edelbrock Super Victor intake
3. COMP Cams Pro Magnum Shaft Mount Roller Rocker Arms 1622-16

Heads are Competion ported and work is absolutely TOP notch.

Super Victor intake is also competition ported.

All done by Larry Smith.

Specs are as follows:

Intake numbers

.100 78

.200 148

.300 202

.400 249

.500 291

.600 320

Exhaust

.100 66

.200 111

.300 159

.400 192

.500 200

.600 215

Valves are Ferrea F6203 and F6202 which are the 6000 series valves in 2.08 and 1.60 sizes with 11/32 stems they are 5.06 long with single groove valve locks. 

Comp Cams 943-16 valve springs

Comp Cams 611-16 valve locks

Comp Cams 749-16 Retainers

11/32 Viton Valve seals

Manley spring cups
Posted by: Rocket

Small Block 3.58 Stroke Forged Crankshaft - 340 Main - New - 10/01/17 10:46 AM

I have a new Mopar Performance 4340 Forged steel crankshaft with stock 6 bolt small block flange still in the box. Fits 273-318-340 main engine blocks. I bought this for a project that I will not get to. It is standing in the corner and want to offer it to someone who can use this. It requires the use of a Chevy connecting rod - 2.100 in rod journal. In a 340 block with stock bore the engine will displace 367 ci and with a 0.030 overbored 340 block the displacement will be 373 ci. Here is the description from Mopar Performance.

Surface hardened, forged Small Block Crankshafts feature radiused fillets at main and rod journals. Each features a 6-bolt flange and is forged from 4340 steel. 3.58" Stroke, 50 lbs., 2.100" Rod Journal, Generic Rear Flange, 340 Main.

Price is $750 shipped in the lower 48 states.

Email me at procketrichard@hotmail.com with any questions.
Posted by: Rocket

Small Block W2 Harland Sharp Rocker Set Up - New 1.5 Ratio - 10/01/17 10:52 AM

For sale is a new set of small block Mopar Harland Sharp aluminum roller rocker arms, shafts and blocks for the W2 and W5 Mopar Performance cylinder heads. Intake and exhaust rockers are 1.5 All rockers, shafts and blocks are new. These rockers can be used on W2 heads with milled pedistals and W5 small block Mopar cylinder heads.
Part number S70025W2k.

Description from the HS site and some links are below.

* Needle bearing allow for more oil flow to the rockers.
* Oil restrictors may be necessary to maintain oil pressure.
* Rockers are designed for big lift cams requiring .100 to .150 taller valves.
* Rocker shafts are drilled to allow for 3/8 mounting hardware.
* Rocker spring clearance is limited to 1.500 if more spring clearance is
required, contact our customer service department to discuss your options.
* W2/W5 Race kits come with .180 offset shafts & stands.
Instructions
Harland Sharp needle bearing, single shaft mount, rockers for Small Block
Chrysler are like no other on the market. The only shaft rocker of this style to feature heavy duty needle bearing fulcrums matched with specially heat treated, heavy wall, rocker shafts. Harland Sharp Mopar kits are designed for extreme applications with valve springs up to 1.500 diameter and .900 lift cams. The
7/16-20 x 5/16 ball adjusters are designed for use with the factory style pushrods, length to be determined after you have rockers installed. Harland Sharp SB Mopar kits require taller valves. Approximately .100-.150 are necessary for correct geometry but sometime lash caps can be used. Kits include rocker arms, shafts, spacers, rocker stands, adjusters and nuts. See our instruction link for replacement and service parts #s.

New price for kit including rockers, shafts and blocks is $1,180 at summit. I will sell my new set for $975 shipped in the lower 48 states. Feel free to contact me to discuss.

Email procketrichard@hotmail.com for more information.
Posted by: Rocket

Small Block Fluidampr - New - 10/01/17 10:59 AM

I have a new small block fluidampr that I purchased but will not be using. I purchased this a number of years ago and has been boxed and on the shelf.

Price is $375 shipped to the lower 48 states.

Contact procketrichard@hotmail.com for more information
Posted by: Rocket

Small Block 360 4 Bolt Iron Main Cap Kit - New - 10/01/17 11:03 AM

I have a new 4 bolt main cap kit Mopar Performance part # P5249675 for 360 engines. These are the same main caps used for Mopar R series race blocks. They are ductile iron. They are a superior material to stock caps and use more material for strength. You can use these on a stock 360 block without using the outer bolt holes. Some builders cut off the outer 2 bolts for ease of installation. A great upgrade for stroker engine builds. Kit comes with 4 caps and bolts.

I used a similar 340 main kit on a 340 stroker I built and machined off the outer two extra bolt holes. Fit perfect.

This 360 main cap kit lists for $180 on summit. I will sell it for $140 shipped in the lower 48 states.

Contact me at procketrichard@hotmail.com with questions
Posted by: 70sixpkRT

A12 Six Pack Carbs - 10/01/17 12:09 PM

I have a set of Six Pack manual carbs for an A12. Front: Date code 1229 part# 4393. Center: Date code 1229 part# 4391 for manual. Rear: Date code 0929 part# 4394. All 3 carbs are untouched and in good condition.
$1600 + shipping.
Posted by: dodge turbo

MSD 6Al BTM. - 10/01/17 02:17 PM

Replaced this with a programable ignition

Everything words good. Comes with timing retard knob.

$150
Posted by: dodge turbo

MSD 2 STEP with adjustable chip - 10/01/17 03:30 PM

Comes with adjustable MSD rpm chip

$50
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 04:51 PM

Low deck six pack intake. New, never used. $375 plus shipping. PM me on the board, check, money order or PayPal for payment.
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 04:52 PM

RB distributors. MSD ready to run $300, 440Source ready to run for $40. Shipping extra. Check, money order or PayPal for payment. PM me on the board.
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 04:54 PM

SS hangers for E body car. These are new Mopar Performance parts. Never used. $40 for the pair plus shipping. PM me on the board. Check, money order or PayPal.
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 05:01 PM

SOLD
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 05:03 PM

Old school fuel filter. I have a new housing with a new filter element. The old housing on the left is cracked. $40 plus shipping. Check, money order or PayPal for payment. PM me on the board.
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 05:05 PM

Sold
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 05:09 PM

SOLD
Posted by: gregsdart

Re: For Sale - Race Parts - 4th Quarter - 10/01/17 07:07 PM

Gen 3 parts
Nib Apache heads, loaded $1200 shipped
Complete intake system , loaded as it came off 485 hp crate motor, zero time on it. $450 shipped
Helcat blower, needs front bearing (typical warrantee problem) $ 1600 shipped
5.7 core motor, eveything but valve covers make offer
Jeep srt8 exhaust manifolds, $400 shipped
Scat 6.2 long sbc hbeam rods frm same 6.1 drag pack motor, 2.1 bearings on rods .927 pins, warm up time only, $230 shipped
Stock dual plug coils from newer 6.1, $80 shipped
Molner 3.888 stroke Gen 3 hemi crank, $600 plus freight
5.7 core motor, eveything but valve covers make offer
Possible package deal
5.9, 5.2 Magnum parts
Standard length Magnum engine stainless steel 2.02 intake valves (already back cut 30* angle), 1.62 exhaust valves, new in box. Springs, retainers, keepers, seals and locks, new, never opened. New, 399 +$30 for back cut, from Hughes, $340 shipped
5.2/5.9 Magnum hydraulic roller cam from Comp, 225 dur at .050 int, 225 dur at .050 ex, 107 lsa, .480 lift. $220 shipped
Small block distributor FBO advance limiting plate and Mr Gasket spring kit, $25 shipped
BB parts
6 2.25 intake valves for 440-1 heads $75
8 2.19 intake valves for 440-1 heads, $120
three sets ball to ball pushrods, one low deck for Jesel , two high deck for Jesel, 3/8, Indy 3/8 heavy wall. Make offer.
One set ball to cup 8.60 length pushrods, make offer.
Rocker shaft retainer kit for Indy 440-1 original rockers $190 (?) from Indy, $100 shipped

Greg 763 439 2129 gregsdart5547@yahoo.com
Posted by: an8sec70cuda

Re: For Sale - Race Parts - 4th Quarter - 10/02/17 10:11 AM

Digiset timer...used for my nitrous. Nothing wrong w/ it at all. Comes w/ the base and instructions.
$75 shipped in the lower 48

Titanium valvespring retainers, set of 16. Very little use.
For 1.550" springs and 10° locks, Overall OD is 1.500", small step is .720", large step is 1.120"
$100 FIRM shipped in the lower 48, paypal accepted if you cover the fee
PM me here or call/text 843-431-8376
Posted by: Billy

Re: For Sale - Race Parts - 4th Quarter - 10/02/17 10:41 AM

1968 Dodge Dart fiberglass fenders excellent quality and in perfect condition! I am converting my Dart back to original therefore I do not need the fenders

$250!!!

Located outside of Chicago
Posted by: johnnyd

New Cloyes double roller adjustable timing chain for Mopar - 10/02/17 12:51 PM

New Cloyes double roller adjustable timing chain for big block B/RB Mopar $150

more pics:
https://boston.craigslist.org/sob/pts/d/new-cloyes-double-roller/6315023110.html
Posted by: johnnyd

Fire Core angled boot spark plug wires B/RB big block - 10/02/17 12:52 PM

Fire Core angled boot spark plug wires for BBM with aluminum holders. HEI cap style. Slightly used but great condition 440 400 451 383 SOLD!

more pics:
https://boston.craigslist.org/sob/pts/d/fire-core-angled-boot-spark/6315020699.html

Posted by: johnnyd

ARP big block main studs - 10/02/17 12:53 PM

ARP big block main studs. Mock up use only ****SOLD***
Thanks Moparts!
Posted by: johnnyd

New Indy 440-1 intake valves set of four. 2.19 $40 - 10/02/17 12:54 PM

New Indy 440-1 intake valves set of four. 2.19 $40
Posted by: johnnyd

ATI Performance Products 917120 7" Harmonic Damper - 10/02/17 12:55 PM

ATI Performance Products 917120 7" Harmonic Damper For Big Block Mopar new condition. Possibly mas used as mock up before I got it. In original box. SOLD!

more pics
https://boston.craigslist.org/sob/pts/d/ati-performance/6315081944.html

Posted by: johnnyd

MSD big block Mopar distributor 8536 - 10/02/17 12:56 PM

MSD big block Mopar distributor 8536 440 B/RB with cap and rotor
$250

more pics:
https://boston.craigslist.org/sob/pts/d/msd-big-block-mopar/6315089341.html
Posted by: johnnyd

Indy 440-1 rocker arms - 10/02/17 01:04 PM

Used set of four rockers covering each style Indy 440-1 Rockers. These are the Indy roller tip rocker arms for the 440-1 head. Perfect for spares! Two exhaust rockers and two intake rockers for each side. $65 shipped for all 4 rockers. Don't get caught at a race with a broken rocker and no spare.
Posted by: Joesixpack

Re: MSD big block Mopar distributor 8536 - 10/02/17 01:09 PM

nos direct connection v8 blue ignition wire set$SOLD
cowgerwilliam035@gmail.com

Posted by: Rocket

Small Block Crow Solid Roller Cam - Used - 10/02/17 10:53 PM

I have a Crower solid roller in great condition. This was used in a street strip engine for a couple of summers. Excellent street roller. Strong midrange power. Part number is 31406Specs from Crower are as follows:
Lobe center 112
Advertised Duration: Intake / Exhaust 270 / 280
Duration @ .050" Lift: Intake / Exhaust 236 / 246
Lobe Lift: Intake / Exhaust .367 / .365
Rocker Ratio: Intake / Exhaust 1.5 / 1.5
Gross Valve Lift: Intake / Exhaust .550 / .548
Low RPM 2500
Peak HP 6000
Redline 6500

Level 4 camshafts are designed for heavily modified engines. They have a definate lope at idle and are best suited for dual purpose hot street/drag strip, hot marine and oval track applications.

Recommended Modifications
Headers, dual exhaust, large cfm carburetor, performance ignition and increased compression of 10.25:1 and above is required. Cylinder head modifications would be beneficial. Use with automatic transmission with high stall torque converter or manual transmission. Close attention to proper ring and pinion gear set and tire diameter is imperative.

Product Characteristics
Definate lope at idle. These grinds exhibit strong mid-range to top end toque and horsepower.
Price is $200 shipped in the lower 48 states.
Posted by: Sburke

Re: For Sale - Race Parts - 4th Quarter - 10/03/17 12:16 AM

BB 727 W/ BRAKE New. Zero runs built by A&A. Have spec sheet of everything done.
8 inch billet convrter.
Winters race shifter
Paid over 5800 for all.
Would like to get 3800.
Consider offer.
Posted by: Sburke

Re: For Sale - Race Parts - 4th Quarter - 10/03/17 12:22 AM

440
Bored out .060
Weisco forged pistons
Forged rods

Crower Ultra Action Performance Level 5 Camshafts 32414
Summit Racing Part Number:CRO-32414
Cam Style: Mechanical roller tappet
Basic Operating RPM Range: 3,750-7,750
Intake Duration at 050 inch Lift: 262
Exhaust Duration at 050 inch Lift: 268
Duration at 050 inch Lift: 262 int./268 exh.
Advertised Intake Duration: 304
Advertised Exhaust Duration: 310
Advertised Duration: 304 int./310 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.650 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.624 in.
Valve Lift with Factory Rocker Arm Ratio: 0.650 int./0.624 exh.
Lobe Separation (degrees): 106
Intake Valve Lash: 0.026 in.
Exhaust Valve Lash: 0.028 in.

Harland Sharp roller rockers

Cloyes Hex-A-Just Timing Set

Crowder roller lifters
Team G manifold.
Ported and polished 452 cylinder heads Crowder valve springs
Balanced and blueprinted
Asking 2900
Ran 11.80 in 3800 lbs 65 coronet
Posted by: Sburke

Re: For Sale - Race Parts - 4th Quarter - 10/03/17 12:23 AM

Rebuilt manual valve body. Has deep pan. Red line clothes and band.
Also have Hughes 4500 stahl convertor.
Asking 700 for transmission
Asking 400 for torque converter.
Need to let go
Posted by: Sburke

Re: For Sale - Race Parts - 4th Quarter - 10/03/17 12:27 AM

New 850 alcohol carb built by Ken Jones Performance.
Asking 600
Posted by: sixpacksteve

64-65 Plymouth Hood AFX Scoop - 10/03/17 02:03 PM

selling hood.
real Nice shape! had a fab air cleaner setup.
can cutout aluminum for you needs.
pm me! $500. prefer local pickup or will be at Mopars at the Valley!
its a Glasstek!
Posted by: Vincenzo

CSI Carbon Fiber Shield 727 - 10/03/17 08:05 PM

Like new condtion, missing one bolt and bushing. Out of date for NHRA. $300 plus the ride. Please feel free to ask any ???'s I'm at 43920 thanks
Posted by: fbs63

493 RB Rotating assembly - 10/03/17 09:49 PM

493 RB rotating assembly. Eagle crank, Crower billet I beam rods,Ross 4.350 bore flat top pistons and pins,King bearings. Very low use.
$1650 shipped in the lower 48. PM here,text or call 7zero8-207-five374
Posted by: fbs63

New Edelbrock MW Victor CNC ported heads - 10/03/17 10:03 PM

New Edelbrock MW Victor CNC ported heads. New castings CNC ported. New 2.20 Intake and 1.81 Exhaust valves. All new Comp Ti retainers,10 deg keepers,Roller springs good to .750 lift and seals. Includes RB valley cover. 73cc chamber. Will be assembled for buyer. Have flow sheets. Flow 312@.500 lift,359@.700 Intake. Real,not inflated flow numbers. $2500.00 shipped in the lower 48.PM here,text or call 7zero8-207-five374 SOLD
Posted by: fbs63

Edelbrock RB Super Victor intake - 10/03/17 10:09 PM

Edelbrock RB Super Victor intake. Dominator flange, fully ported with blended spacers. Very nice piece. $400.00 shipped in the lower 48. PM here,text or call 70eight-two07-5374 SOLD
Posted by: fbs63

New BB JE pistons,pins and rings - 10/03/17 10:44 PM

New BB RB JE pistons. 4.440 bore,1.850 compression height. Trend tool steel .990x2.930 pins. Total Seal AP 4.440 bore ring set. All New. $350.00 shipped in the lower 48. PM here, text or call 708-two07-five374
Posted by: 493_john

Re: New BB JE pistons,pins and rings - 10/04/17 01:43 AM

Indy cast Predator tunnel ram, new..not used...not milled...not ported, comes with 2x4500 top, 1/2 plenum spacer, A.R.T. bellcrank linkage, magnafuel 4 port regulator with lines to carb and 2 Holley 1050 8896-1 carbs with tr floats and Quick Fuel float bowls with sight glass.

$1950 text for pics john 586-222-2728
Posted by: julian2007

used nrc offset distributor - 10/04/17 07:39 PM

good shape 500.00 plus the ride
937-489-9397
I'll add photos tomorrow
Posted by: julian2007

mega 500 delay box like new - 10/04/17 07:43 PM

Only used 1 season mega 500 delay box
400.00 plus the ride
937-489-9397
Posted by: rbkt65

Re: For Sale - Race Parts - 4th Quarter - 10/04/17 09:20 PM

ptc 8 inch converter. 4 passes on it. 5400 stall. not enough for my car. don't check pm's here very often. 500/obo plus ride. text is best as not allowed phone at work. no scammers. located near stl,mo. postal m/o or cash.might trade for bb .030/.040 pistons with 2.05 comp height, h beam rods or ????. want to build street 440 with bout 10.0/10.5 to 1 compression. contact info is 618-946-4241
Posted by: B3422W5

Complete 3 inch A body exhaust - 10/05/17 11:54 AM

Includes flowmaster mufflers, chrome tips, under a year old. Was hooked up to Dougs headers.
Had to cut in a couple places when i removed it, easy to weld back up.
150.00 takes it. Must pickup, wont ship. Southwest Mi( Kalamazoo area)
PM me on the board
Posted by: TheOtherDodge

RHS MA-X Heads - 10/06/17 09:53 AM

These are used but have been cleaned and inspected.

Will need new guides/seals and a valve job (required when replacing guides). Other than that, they are ready.

2.02/1.625, springs are new set at 125 seat, 355 open.

Brand new these are $1,350 shipped. I am asking $650 shipped.

Please email me at jsintexas2@ yahoo. com
Posted by: sixpacksteve

Hurst Ramrod Shifter - 10/06/17 01:47 PM

Still works great!
Bracket and rods included!
came off an A-body!
SOLD! Thanks Moparts
Posted by: EV2Bird

Re: Hurst Ramrod Shifter - 10/06/17 05:19 PM

SOLD... THANKS MOPARTS!

NEW Mopar Performance .557 Solid Camshaft 273 318 340 360

CAM ONLY!

Still has there protective coating and yellow paper wrap.



PM me here. THANKS!

I purchased it approx 7 months ago, used a comp cam I had and needed the lifters from the .557 kit.
Posted by: @#$%&*!

Re: For Sale - Race Parts - 4th Quarter - 10/06/17 06:48 PM

Holley Street Dominator Intake Manifold RB 440-413

Blasted clean and washed with soap and water. All threads good and chased, never ported, no signs it was ever milled. Someone did shorten the front coil mount pedestal for some reason but it still has enough threads to hold a coil. Perhaps will work with a small-block coil bracket, I should try that.
$200 plus shipping
not offended by offers
PM through board
Posted by: EV2Bird

Re: For Sale - Race Parts - 4th Quarter - 10/06/17 07:47 PM

Comp Cams 273 318 340 360

Comp Cams 305AH-8 Camshaft
Comp Cams 822-16 Lifters

$250 Shipped Lower 48 only

PM me here.

Thanks.
Posted by: EV2Bird

Re: For Sale - Race Parts - 4th Quarter - 10/06/17 07:48 PM

New Mopar Performance Cam Kit P4120231 284/284 lift 484/484 Dur 239@50 108 68 Overlap

Cam and Lifters $235 shipped usa lower 48 only

PM me here. Thanks.
Posted by: KOS

Re: For Sale - Race Parts - 4th Quarter - 10/06/17 07:51 PM

588 B1 motor
Brand new build only few dyno pulls and couple street miles...around 1000hp 800ft lbs.
orig B1 heads done by FHOs Tim Banning with Jessel paired rockers and spray bar oiling.
Indy Maxx new gen big sleeve tall deck block 4.500 bore
Callies gun drilled ultralite billet 4.625crank
GRP 7.150 rods
JE Coated dome pistons
comp 4/7swap custom roller ground for longevity and streetability
comp offset lifters,Manley Nextex springs
Jesel belt drive,milodon dual line oiling with custom alum pan that will work with tubular K-member
New NOS fogger plumbed
worked 1150dom with BLP wide metering blocks etc
also will come with NEW glide converter built for this combo billet flywheel and
adapter.still in car running. 20K.pm me
Posted by: humpty

Re: For Sale - Race Parts - 4th Quarter - 10/08/17 03:17 PM

BG400 fuel pump. Rebuilt by Barry Grant as a spare but never used since rebuild.

$175/B.O. PayPal preferred.

PM me here.

Thanks for the ad Moparts!
Posted by: mosweethemi

New valve covers Direct Connection - 10/09/17 04:03 AM

Hello I have three new sets of Direct Connection Tall chrome valve covers. 383-440- 318-360- 3.9 V6 $300.00 per set + shipping .I also have about 10 sets of big block and about 7 sets of small block .They sell from $275.00 down to $175.00 .All come with chrome bolts and caps and push in breathers . more infor call 540-337-4310 e-mail mosweethemi@yahoo.com
Posted by: davesmopars

HURST B Body Ramrod and Super shifter 4 Speed Rods - 10/09/17 01:27 PM

HURST B Body Ramrod and Super shifter 4 Speed Rods
In nice shape
100.00 plus shipping
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:24 PM

Koni 8212 1123 SPA1 double adjustable shocks
Stroke: 7.00" Max Length: 19.50" Min Length: 12.50" Ride Height: 16.00"
w/ Eibach 14" 130lb. springs, very good condition, $650 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:25 PM

Moroso #65000 4150-4500 2" carb adapter w/ Mr. Gasket #6004 Dominator safety plate and usable gaskets, used, very good condition, $50 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:25 PM

Aeromotive Fuel Filter #12612 -10AN bulkhead w/ 100 micron filter, brand new, only opened for pic, mounts inside your tank or cell, $70 shipped
PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:26 PM

9.00" - 9.56" Deck R3/Weber Belt Drive Motorplates, water jet cut from 1/4" T6061 aluminum. 36" wide centered for tube chassis application or marked for A-Body offset. Can be trimmed to fit any application. Use this plate along with Brian Smith (Smith Innovation) water pump spacers to complete the set up. Only 1 remaining in stock $175.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:27 PM

Moroso Ultra 40 Spark Plug Wires #73815, Spiral Core, 8.65mm, Black, 180 Degree Boots, Universal V8 set, NEW, * SOLD *

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:27 PM

Autometer Super-Lite LED shift lite #5333, new, $60 shipped

Autometer Ultra Lite 2 5/8" Gauge Brake Pressure #4426, mechanical, used, $50 shipped

Autometer temp sender #2252, 1/8" npt for use w/ electric water temp gauge, new, $15 shipped

VDO MegaLite shift light w/ chromoly mount fits 1 1/4" steering shaft w/ t-bolt clamp, used, $80 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:28 PM

Ritter fabricated aluminum W8 valve covers w/ fill bungs & vacuum pump fitting. The tops are slightly warped and I would recommend milling the flanges to assure a good gasket seal. I'll throw in a couple sets of used Fel-Pro gaskets, $200.00 shipped

Paypal (+3%) & US Postal Money Orders accepted

email: mgray0918@verizon.net or PM me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:29 PM

ARP #245-4307 12pt. Head Studs B1 Heads, NEW, $220 shipped

ARP #240-2501 12pt. Balancer Bolt, package has been opened, $28.00 shipped

ARP #200-2903 12pt. Flexplate Bolts, NEW, $14.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:31 PM

Comp Cams BB Mopar Solid Roller, three bolt, older camshaft, used, very good condition, no cam card but here are the specs per Comp:
Intake: 288 @.050 / 4.83 lobe lift
Exhaust: 316@.050 / .480 lobe lift
114 lobe separation

Comp Cams Roller Lifters, .904 dia., centered, used, all rollers turn freely

Triple Springs, titanium retainers, locks (15), lash caps (8) (unknown brand, I assume comp)

All came from an engine I purchased and parting out. Package deal all for $500.00 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:32 PM

B1/MC valves, 2.400" titanium intake (6) used, 1.780" stainless exhaust (6) used, $400 for all shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:33 PM

Misc. Nitrous:
Induction Solutions 1/4 Turn Valve #19705, w/ 6AN fittings, New, *SOLD*
Induction Solutions 1/4 Turn Valve Mount Tab #19809, New, *SOLD*
RJ Race Cars Aluminum Handle for 1/4 Turn Valve, New, $11 shipped
4" dia. Nitrous Pressure Gauge, used, $45 shipped
4ft. 6AN Line, NOS #15420, used, *SOLD*
1ft. 4AN Line, NOS #15210, used, $15 shipped
Edelbrock #72281 WOT Switch, 4500 carb, $30 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: MGC340

Two Mopar R1 blocks - 10/09/17 05:38 PM

2 Mopar race R1 small blocks

R1 low deck small block
9.095 deck
4.085 bore
4-bolt mains
48' lifter
Bushed lifters
50 mm cam bearings
Has extra head bolts
$1700 with 2 new 50mm cam cores.

R1 tall deck block
Uncut tall deck
4.030 bore
4 bolt mains
48' lifter bore
Extra head bolts have been milled off.
Bushed lifters
New cam bearings in box
$2500

Please pm me for details, thanks Mark
Posted by: Plumb Wired

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 05:46 PM

Misc. Parts:
Stroud Large Chute Pack for large pilot style chute, used, good condition, $35 shipped
Jiffy Tite Quick Disconnect Transmission Lines #200T1, New, $85 shipped

PayPal (+3%) & USPS Money Orders accepted

email: mgray0918@verizon.net or pm me thru Moparts

Thanks,
Mike Gray
Posted by: Azzkikrcuda

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 08:31 PM

Turbo Action 10" converter for 727 Small and Bigblock. PN# 17805S Medium Stall. Was in a 70 Challenger 496cid with 4.10 gear, around 10,000 street miles on it. Worked good, Stalled around 4000rpm, changed combo. $375+shipping PM me here if interested
Specs and info http://www.turboaction.com/s800.html
Posted by: Azzkikrcuda

Re: For Sale - Race Parts - 4th Quarter - 10/09/17 08:33 PM

Used Smith Brothers 5/16 diameter .083 wall pushrods, ball and ball ends 9.390 length. Pushrods look new, was setup for 440 solid cam and Comp Pro Magnum rockers. Were $170 new, $100+shipping

Clevite V-series bearings MS-1795V Std. size, 440 small thrust flange. Mocked up but not ran. $75 shipped

PM me here if interested.
Posted by: Rapid340

Re: For Sale - Race Parts - 4th Quarter - 10/10/17 07:55 AM

Magnum 318 pump gas crate motor. Never fired.

New pistons, file fit rings, bearings, .485 lift hydraulic flat tappet cam/lifters and timing set. Resized rods with ARP bolts, rod/main crank journals polished. Rotating assembly fully balanced, bearing clearances verified with mic/bore gauge, cam degreed in. The Magnum heads have had a valve job and been fully ported, new seals all guides checked/replaced if needed. Valve spring heights have been equalized.

Peak HP close to 400HP can be achieved with 89 octane with a 750 cfm carb and headers. The heads and cam would also work well with exhaust manifolds but power output would not be as high. The intake is actually not yet torqued down so an air-gap style or single-plane M1 intake can be used if you prefer that over the dual plane Mopar performance M1 shown (I have all three).

This 318 does not have a smooth idle but it will smooth out quickly as revs increase off-idle . A high stall converter is not really required, something in the 2K-2.5K range would be good for street use. Many stock 318 torque converters were designed for this RPM range.

I have personally ported the heads and assembled this motor.

$3375 (less if you can use your own valve covers, intake or distributor.)

I do have a run-in stand if you need to hear it run.

thanks

jeffpatterson@copper.net
Posted by: SILVER67

Big Block RPM heads - 10/10/17 08:30 AM


BBM Edelbrock RPM heads 60929

72cc chamber
2.14/1.81 s/s valves
COMP Chrome moly 10* retainers
928-16 COMP double springs
Ported by Nick @ Compu-Flo
Flow 292/235
Flow sheet available

No rockers
Hughes roller tip rockers used

ARP head bolts extra

Heads currently on:
505
Pump gas
Flat tappet cam
3900 pounds
3.54 gear
Car does 11.20’s-11.30’s @117-119 with exhaust
Car does 11.0’s-11-teens @119-121 open headers

$1,200 OBO plus the ride

Certified check or Money Order ONLY
No PAYPAL
Buyer pays shipping
315-657-2808
Additional photos available
PM or DLAWD@aol.com
Posted by: davesmopars

HURST A Body Ramrod 4 Speed shifter - 10/10/17 12:37 PM

HURST A Body Ramrod 4 Speed shifter
Complete in excellent condition
Just bolt in and go
1200.00 shipped

I have two of theses decided to sell one of them. the one on the trans is just to show you how it looks mounted
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/10/17 07:57 PM

Wilson ported M1 4500 low deck intake. Full competition porting by Wilson Manifolds. They welded up the outside of the runners and then ported the inside to make the runners larger. This intake has made 750 hp on my low deck 470 with Trick Flow heads. I'm switching over to EFI so I do not need this intake any longer. PM me on the board, PayPal or money order. $950 plus shipping.
Posted by: 2abodymcodes

Re: For Sale - Race Parts - 4th Quarter - 10/11/17 03:35 PM

Small block headers and collectors. came out of a 73 Dart Sport w/360. I think they are Summit brand. $50.00 picked up in north central ohio. send a P.M. or text at (419)543-6014
Posted by: 2abodymcodes

Re: For Sale - Race Parts - 4th Quarter - 10/11/17 04:08 PM

Cheetah Manual Valve Body. fits a 904 or a 727. used 3 seasons for weekend racing. $150 plus shipping. P.M. here or text at (419)543-6014
Posted by: 2abodymcodes

Re: For Sale - Race Parts - 4th Quarter - 10/11/17 04:10 PM

Hughes 3500 stall converter. used 3 seasons for weekend racing. ta 904. 27 spline. Part # 27-35. $280.00 plus shipping. Send a P.M. or text to (419)543-6014
Posted by: 2abodymcodes

Re: For Sale - Race Parts - 4th Quarter - 10/11/17 04:15 PM

Sunpro tach with shift light $30.00
Holley red fuel pump L-145-2 $40.00
B&M line lock switch and solenoid $40.00
Auto Gage set, oil , voltz , temp $30.00
All plus shipping or pick up in north central ohio.
Send a P.M. or text to (419)543-6014
Posted by: 71yelladustr

Re: For Sale - Race Parts - 4th Quarter - 10/12/17 08:45 AM

Mopar Performance M-1 RB Max Wedge "337" 4150 flange single 4bbl intake manifold. New, never bolted down or cut. $300+shipping. Call, PM, or text (573)433-0192. Thanks.
Posted by: SB412DUSTER

Re: For Sale - Race Parts - 4th Quarter - 10/12/17 11:26 AM

P4876757AB Head studs
ARP W9 head studs for an aluminum block
New in box
$275 plus shipping
Posted by: AndyF

Re: For Sale - Race Parts - 4th Quarter - 10/13/17 08:26 PM

ARP bolt kit for W2 heads. New in box, never used. I checked the box and it is complete with 10 short bolts, 2 long and 8 medium. Also has 20 washers and assembly lube. $50 plus shipping. PayPal, money order or check. PM on the board.
Posted by: DusterW2

Re: For Sale - Race Parts - 4th Quarter - 10/14/17 02:47 PM

Hooker Header collector reducer, 3-1/2”, P/N 11036, QTY 1, New, $18.00 + shipping 23703

Accel coil, P/N 8140, VGC, $18.00 + shipping 23703

MOROSO rim screw set (34), P/N 90100, used, VGC, $12.00 + shipping 23703

Braided Hose for MILODON external oiling kit, P/N 21010, 18” length, Russell AN816-8D to 3/8” NPT fitting and Aeroquip FBM1015 -12AN Hose fitting. $40.00 + shipping 23703

Sealed Power File-Fit Plasma-Moly Piston Ring Set, R9344035, 1/16”, 1/16”, 3/16”, 383 Mopar + 0.035”, New **** One second ring previously filed, $100.00 + shipping 23703

8-3/4 adjustable pinion snubber, P/N P3690182, VGC, $55.00 + shipping 23703

jduster340@verizon.net or PM DusterW2 (Prefer US Postal Money Order)
Posted by: dsd70bee

Re: For Sale - Race Parts - 4th Quarter - 10/14/17 02:48 PM

One set of 426 HEMI rocker assemblies, Everything aftermarket for a Top Fuel or Alcohol aluminum type head, Stage V roller tip intake rockers $2000.00 for the pair (708)288-2879 Scott
Posted by: dsd70bee

Re: For Sale - Race Parts - 4th Quarter - 10/14/17 03:05 PM

One set of eight 426 HEMI Stage V roller tip intake rockers in excellent used condition $750.00 for the set (708)288-2879 Scott
Posted by: 11secdart

Re: Edelbrock RB Super Victor intake - 10/14/17 08:14 PM

For Sale Pair of Fabricated Valve covers for Small Block,with breather tubes $100 Chrome deep pan for 904 , new drain plug $35 Air cleaner assy. 5' tall x 9 ' wide, K&N filter, 4150 base plate, chrome lid $35 shipping extra lbvracing@aol.com or p.m.
Posted by: camastomcat

Re: For Sale - Race Parts - 4th Quarter - 10/15/17 10:00 AM

Hard to find World cast steel hemi block with all the tricks
55mm roller cam bearings
55mm roller cam (specs when interested party is present)
15-1 custom 4.56 bore Ross pistons, 2 spares
7/16 double taper Smith Bros. push rods
Crower Center counter weight billet crankshaft 4.625
Bushed lifter bores
Weaver dry sump system
Oliver billet rods
Big Boy Hemi Predator heads 2.45 intake, 1.900 Ex valves
Flow in the low 500 range
Marcella tunnel ram with single and double tops
Front drive distributor
Crank Trigger, ATI balancer
Jessel belt drive
Williams custom dry sump pan
It's all figured out and dyno sheets available
Call Tom 801 949 7791
Intake to dry sump $27,500 This thing is an animal
Posted by: cudadoug

Re: For Sale - Race Parts - 4th Quarter - 10/15/17 04:29 PM

Computech weather station/run calculator. Complete, circa 2001. Still works great, used it a month ago to go rounds at the local Mopar race. Used it yesterday at test and tune just for fun.

Includes Electronic Barometer, Thermo Hygrometer and run/HP/Gear programmed calculator.

$175 shipped to you.

Best way to contact is phone/text or email:

209-321-1747
dmayle@cheemafreightlines.com

Posted by: junkyardmaxie

Re: For Sale - Race Parts - 4th Quarter - 10/15/17 08:54 PM

for sale like new holley blue fuel pump with fittings NO FUEL PRESSURE GAGE AS PICTURED $75.00 PLUS SHIPPING
Posted by: junkyardmaxie

Re: For Sale - Race Parts - 4th Quarter - 10/15/17 08:58 PM

FOR SALE NEW liquid filled water temp gage summit $119.00 buy this $60.. plus shipping
Posted by: pittsburghracer

Re: For Sale - Race Parts - 4th Quarter - 10/15/17 11:36 PM

Small block 727 core for sale. Been sitting inside my heated garage for years so condition unknown and is why I'm selling as a core. WILL NOT SHIP but can deliver to the Halloween Classic at Norwalk Ohio later this month if paid in full before race. 125.00
PM or jacadamore@gmail.com
Posted by: davesmopars

HURST A Body Ramrod 4 Speed shifter - 10/16/17 12:17 PM


HURST A Body Ramrod 4 Speed shifter
Complete in excellent condition
Just bolt in and go
1200.00 shipped

I have two of theses decided to sell one of them. the one on the trans is just to show you how it looks mounted
Posted by: Rapid340

Norris W2 roller rocker arm parts - 10/16/17 09:52 PM

These are what I believe to be new Norris W2 roller rocker arm bodies and one hold down.

2 right, 2 left and 2 exhaust plus one hold down.

$185 plus shipping

thanks

jeffpatterson@copper.net
Posted by: KOS

Re: For Sale - Race Parts - 4th Quarter - 10/17/17 10:11 AM

BB Meziere WP 35gph.GWC.$325.PM me
Posted by: fbs63

Re: For Sale - Race Parts - 4th Quarter - 10/18/17 08:38 AM

BB Mopar Milodon aluminium oil pump and cover. Dual inlet. VGC. $225 shipped in the lower 48. Located in North West Indiana. Pm here, text or call 708-two07-537four.
Posted by: wupracing

Big Block Oil Pan (Milodon) - 10/18/17 08:03 PM

Big Block Mopar oil pan.Milodon part # 31015 fits A,B,and E body it is an external pickup and has the pickup with it.It is 8"deep.Oil Pan new is $225 the pickup is $58 and the fitting is $55 That is $338..I will take $125 shipping is on you.It had a plug welded on the top pass. side and does not leak been that way for a while.If you want to use the stock type pickup all you have to do is take the one in the pan out and put a plug in the hole where the line comes out.They sale the plug at Jegs or Summit.Will not work on my new setup.





Posted by: pittsburghracer

Re: For Sale - Race Parts - 4th Quarter - 10/18/17 11:06 PM

Radiator out of a 1972 (340) Duster that was rebuild years ago by a local radiator shop. This thing works great and is ready for race car cooling or number correct 1972 Duster. Trying to sell local first in PA but will be traveling to Ohio in the near future so delivery to that area may be possible. 250.00 plus delivery. Freeport, PA. 16229 area. PM or jacadamore@gmail.com Can deliver to Norwalk during the Halloween Classic.



IMG_1601 by John Cadamore, on Flickr


IMG_1602 by John Cadamore, on Flickr


IMG_1604 by John Cadamore, on Flickr
Posted by: davesmopars

1968 A Body Hurst Super Stock Original Hurst Shifter - 10/18/17 11:38 PM

1968 A Body Hurst Super Stock Original Hurst Shifter
with cable and Chrysler Hurst console Harness
super nice shape
1200.00 plus shipping
Posted by: KOS

Re: For Sale - Race Parts - 4th Quarter - 10/19/17 03:00 PM

BG 2 port $80 with fittings -10in -6s out or $50without.pm me
Posted by: E-Ticket

Re: For Sale - Race Parts - 4th Quarter - 10/19/17 06:57 PM

Holley Street Dominator Intake For RB Motor.

$195.00 insured UPS shipping included in the lower 48!

Interested parties please PM me.

Thanks for the ad space Moparts!!!