Posted By: gearbanger
Vacuum pots-440 6pak - 05/20/08 05:45 PM
Bought a nice set of 440 six-pack holley carbs from a drag racer who had the out-board carbs set up as mechanical secondaries. I want to re-vacuum these carbs and I have new vacuum diaphram rubbers, but I don't have the aluminum diaphram pots that bolt to the side of the front and back carbs. Any ideas on where to get them? TKS.
Posted By: BradH
Re: Vacuum pots-440 6pak - 05/20/08 05:49 PM
Check w/ Pro Max, one of the site sponsors listed on the home page of this place.
Posted By: LimeliteAero
Re: Vacuum pots-440 6pak - 05/20/08 05:55 PM
a few years ago I had a local parts joint order them up.
Posted By: fastnos
Re: Vacuum pots-440 6pak - 05/22/08 11:44 AM
Posted By: SSAAHemiFan
Re: Vacuum pots-440 6pak - 05/22/08 08:49 PM
If you haven't already, be sure to verify the orifices weren't plugged when they were switched to mechanical secondaries.
Posted By: Lee446
Re: Vacuum pots-440 6pak - 05/22/08 10:49 PM
They have 'em on e-bay. New pair for around $124.