Front Brake Conversion Kits

Has anyone used this kit or company and if so were you happy with it? : http://www.resto-modtechnology.com/servlet/the-2131/63-dsh-74-MOPAR-|-CHRYSLER/Detail

Thanks
Bryan

Looks like a reproduction 1973 A body kit. I think the knuckles are cast rather than forged. Other than that it should work fine.

If it was me I'd look for used forged knuckles rather than buy new cast ones, but not everyone has that option.

Thanks, are there any other kits out there that are good and available? We have checked with several places and seems like most have one component or the other not available.

If you want stock I would go for some OEM parts. They are not too hard to find because they are mostly interchangeable between makes. It would cost a lot less and the key parts are forged steel.

They made several different brake spindles but they mostly interchange.

Here is a very good link with some information.

https://board.moparts.org/ubbthreads/showflat.php?Cat=0&Number=6845317&Main=6844984