Kill switch rating

Posted By: Osyman

Kill switch rating - 10/03/11 02:12 AM

I'm putting a normally open momentary switch between my starter relay and the NSS. What current rating does that need to be? I figure I should be able to get away with 10A rated switch?

Posted By: RapidRobert

Re: Kill switch rating - 10/03/11 11:59 AM

Quote:

I figure I should be able to get away with 10A rated switch?

If you have a 10 amper on hand I'd use it, should be plenty for that circuit

Posted By: GoodysGotaCuda

Re: Kill switch rating - 10/03/11 12:09 PM

Quote:

Quote:

I figure I should be able to get away with 10A rated switch?

If you have a 10 amper on hand I'd use it, should be plenty for that circuit

x2, however you can check the load on that wire if you wanted to. Just power the control circuit of the starter relay with a meter and see how much it pulls.