Head work

Over the winter i would like to send out my heads to have some port work done.The heads are B1 Bs would like some info. on a decent place to send them.I know there's better heads out there but I have these and a new set of harlem sharp rockers $1000.00 and headers also $1100.00 so I'm not going to change right now.So if some one could point me in the right direction would be great. I live in NJ.

call dwayne porter at porter racing heads south burlington vermont, 1-802-951-1955.

Thank you. any other places anybody knows of?

Modern Cylinder Head? Also board members.

R.

http://www.b1heads.com/

Found this:
http://www.etheads.com/00products.htm#

Click on the b1 bs link and it shows flow numbers.
They have some testominals from Koffels.
I talked to them, but have not used them.
I believe the shown flow numbers are ported to max wedge port size, not sure on valve diameter, but smaller 11/32" valve stems compared to the stock 3/8".

Dwayne Porter and Modern Cyl Head of two of the best there is. I used Dwayne Porter on my Indy heads and the work is perfect and he is a very nice and smart guy. Ron

Well I talked too Dawayne porter and seems to be a nice guy full of info. I will send him my heads after the season ends. Thanks for the feed back