Posted By: Mapandjlp
Summit Racing - Turbo Action Trans - Who's bought one? - 08/12/11 08:51 PM
Anyone have any experience with this transmission? Looking at one for my mild 360...
http://www.summitracing.com/parts/TAC-19201L/
Posted By: RobX4406
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/13/11 01:13 AM
Alum drum for a mild street car with a 904. Sounds like overkill to me.
TA makes good stuff. If you were closer there's a guy here that would build you a SOLID 904 for less than 1/2 that price.
Posted By: Mapandjlp
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/13/11 02:22 PM
Overkill? I hadn't even condisdered that. Here's the cheaper one at Summit. It's only rated to 300HP. I'm guessing I'm close to that number, maybe even a tad over. Plus the TA unit has the lower first gearset...
http://www.summitracing.com/parts/TCI-111338/
Posted By: 79powerwagon
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/13/11 03:49 PM
You probably don't want TCI (as it's know around here as Total Crap Incorporated). But why would you want to spend that kind of coin for a transmission?
What's wrong with the one you have?
What are you trying to built that requires such a specific 1st gear ratio?
Why not just build your own? They're EASY!!!!!
Posted By: Mapandjlp
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/13/11 06:50 PM
I've done a couple of 727s in the past, so I'm sure I could get the job done. I was just being lazy, I guess. Maybe I'll give it a shot. Can you guys suggest a rebuild kit for the trans and good shift kit for the valve body?
Posted By: RobX4406
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/13/11 07:07 PM
Posted By: goldmember
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/14/11 05:10 AM
Until you make enough HP to run 10's you do not need much and the 727/904 is easy to build yourself and save the $$ for other things.
Posted By: meathead66
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/14/11 01:34 PM
Also try Kieth. He did me good.
http://www.727specialist.com/
Posted By: MadMax58
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/14/11 10:11 PM
Give ATI a call. They are in Baltimore, MD.
http://www.atiracing.com/
Posted By: 69Chrgr
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/15/11 03:07 AM
Call Frank Lupo at Dynamic converters, hes been doin chrysler stuff for 30 years.
Posted By: J_BODY
Re: Summit Racing - Turbo Action Trans - Who's bought one? - 08/15/11 04:34 AM
It states "clutch hub" = aluminum.... not direct drum, besides ANYONE who's priced an aluminum drum for a torqueflight knows that the price of an alloy drum is pretty close to the price of that entire trans. Personally, I don't think a $1000 "trans in a box" is a bad deal. Can you build one cheaper....duh! Of course you can, but I bet this one bolt and go knowing TA's history.
CRT web site shows a "stock" 904 at close to $700, the next one up the line good for "500hp on the street" for $1450. Call me crazy, but neither of these prices sound bad to me either, and once again, you can pretty much bet you take it out, install it, and go.... no fuss, no muss!