Moparts

JACKING INSTRUCTIONS

Posted By: Craig61

JACKING INSTRUCTIONS - 07/28/11 09:58 PM

Where on the back of the trunk do the jacking instructions go which panel on the left side of my 1965 plymouth belvedere.
Posted By: 1_WILD_RT

Re: JACKING INSTRUCTIONS - 07/28/11 10:06 PM

Drink a pint of Jack Daniels & put it where ever it'll fit... OE Gold...
Posted By: mopars_1

Re: JACKING INSTRUCTIONS - 07/28/11 11:18 PM

Quote:

Drink a pint of Jack Daniels & put it where ever it'll fit... OE Gold...




Posted By: A12

Re: JACKING INSTRUCTIONS - 07/28/11 11:43 PM

IMO it depends on which assembly plant
Posted By: A12

Re: JACKING INSTRUCTIONS - 07/29/11 12:15 AM

Same question but for a '69 GTX from the LA "E" assembly plant.

My '68 "G" St. Louis road runner was on the right passenger's side, my '69 "A" Lynch Road assembly plant A12 road runner's is still on the right and many, many examples of LR plant '69's on the right, my Dart from the Hmtck plant is on the left driver's side, have seen some C-bodies on the left......so how about the LA plant? It seems the production line layout had as much to do with the label placement as how hungover and you were than a factory tech drawing

LA plant '69 B-body left or right........or middle


MikeR
Posted By: A12

Re: JACKING INSTRUCTIONS - 07/29/11 06:53 AM

Never mind, I found an old photo of my "E" plant '69 GTX with the original jack instructions.........LEFT SIDE for me.....anyone else with a '69 B-body from the LA assembly plant with the original jack instructions still in place?


MikeR

Attached picture 6752160-29_1.jpg
Posted By: A12

Re: JACKING INSTRUCTIONS - 07/29/11 06:58 AM

Common Lynch Road placement.....

Attached picture 6752166-Trunk70XandG70X15REDall3.jpg
© 2024 Moparts Forums