Z Bar for 67 B Body with 11 inch bellhousing

I need a new Z Bar for my 67 B Body. My old one has the lower bracket welded 1 1/4 inches from the end of the tube, and the one that PG just sent me has the lower bracket welded 3/4 of an inch from the end of the tube. This car has not been together since I have owned it so just want to know if the one I have is correct. I am using a 11 inch bellhousing.

thanks

Good chance the arm will hit the bellhousing. Is the tube 9" long?
Here is the correct part for 11" bell in a B-body:
http://www.brewersperformance.com/proddetail.asp?prod=TS914
You can see the difference in the E-body one with the smaller 10.5" bellhousing here:
http://www.brewersperformance.com/proddetail.asp?prod=TS913

Dan

Thanks Dan. ordered one today.