Moparts

Oil Pressure

Posted By: Clements

Oil Pressure - 07/17/11 05:08 AM

My Mechanical Oil pressure gauge on my 500 cid B Stroker reacts like a tach. Have about 1 hr on the motor with no knocking etc. Never drops below 20 but races to 65 and then right back down fast. Melling high volume. Thx ahead
Posted By: dOc !

Re: Oil Pressure - 07/17/11 05:36 AM

And your Q is what ? .... sounds OK(on the surface) to me. What weight oil? ... what is your oil temp?
Posted By: Clements

Re: Oil Pressure - 07/17/11 05:41 AM

30 weight. Just have never seen a needle react so fast. Nothing gradual about it. Does it from a cold start all the way up to 195 engine temp.
Posted By: dOc !

Re: Oil Pressure - 07/17/11 05:47 AM

Straight 30 ? ... do you know how the motor has been clearanced?
Posted By: Clements

Re: Oil Pressure - 07/17/11 05:50 AM

10w30 Not sure on clearance. Taking it out on the road for the first time tomorrow. Would air in line do this?
Posted By: dOc !

Re: Oil Pressure - 07/17/11 05:57 AM

10-30 is not a very heavy oil. Any air in-the-lines would be long-gone after 1 hour running time.
Posted By: Clements

Re: Oil Pressure - 07/17/11 06:04 AM

Suggests on oil?
Posted By: dOc !

Re: Oil Pressure - 07/17/11 06:06 AM

What cam is in it ?
Posted By: Clements

Re: Oil Pressure - 07/17/11 06:16 AM


Comp Cam Xtreme Energy Hi-Lift .564"
Posted By: dOc !

Re: Oil Pressure - 07/17/11 06:22 AM

roller ?
Posted By: Clements

Re: Oil Pressure - 07/17/11 06:27 AM

No
Posted By: dOc !

Re: Oil Pressure - 07/17/11 06:29 AM

I would find some HIGH ZINC oil ....like Valvoline or Brad PITT !
Posted By: Clements

Re: Oil Pressure - 07/17/11 06:32 AM

Thx
© 2024 Moparts Forums