Moparts

4 speed parts interchangeability???

Posted By: thedriver

4 speed parts interchangeability??? - 07/07/11 03:32 PM

Howdy, iv'e come across an old 71 duster 340 4speed car, Just wondering if any of the 4 speed parts (clutch fork z-bar etc etc) are interchangable with an e-body?????
Posted By: JohnRR

Re: 4 speed parts interchangeability??? - 07/07/11 03:37 PM

Clutch fork maybe , Zbar , no , bellhousing yes , linkage clips , yes , zbar bushing yes , rods from the clutch pedal and to the clutch fork, no ... obviously the clutch pedal assembly and trans , no
Posted By: dogdays

Re: 4 speed parts interchangeability??? - 07/07/11 05:05 PM

I'd build the '71. Swinger 340? Fastest smallblock in my neighborhood. Two brothers had'em, 4-speeds, one purple the other pink. They laid many a bigblock to waste as well.

R.
Posted By: thedriver

Re: 4 speed parts interchangeability??? - 07/07/11 05:37 PM

so nothing really is useable for my swap, its stuff like zbar, clutch fork, ballstud bracket, etc, ya know, all them odds and ends im in need of for the swap!
Posted By: Boosted

Re: 4 speed parts interchangeability??? - 07/07/11 05:40 PM

you can see what www.brewersperformance.com has...


They have alot of good info on their site. And you can buy just about anything you need...
© 2024 Moparts Forums