Hey guys, I have a 72 cuda with factory disc brakes. I have an adapter to put the 11.75" rotor on that spindle. Will the Wilwood caliper adapters sold by Mancini bolt onto the spindle I have? Or is there a factory Pin type caliper adapter that will bolt to my spindle and work with the 11.75" rotor? thanks for any input.
Posted By: phil4161972
Re: 11.75 rotor - 06/30/11 08:33 PM
Where would one find the pin type mount?
Posted By: DANA60
Re: 11.75 rotor - 06/30/11 09:06 PM
I got one from Dr Diff for my 11.75 using that caliper.
Posted By: cudazappa
Re: 11.75 rotor - 07/04/11 03:13 AM
just get caliper adapter brackets off of a 76-mid 78 B-body (doba, Charger, Magnum) They used the 11.75" rotors and Pin Calipers. I scored a set and did the same swap on my factory disc 71 Challenger. (bearing spacer for the spindle, new 11.75" rotor, caliper adapter, and reused the caliper!)