Best source for wiring electric choke?

Where have you guys sourced your power for the electric choke? I'm new with having an electric choke and can certainly come up with a bunch of "it'll work" ideas...but what's *the best* route generally?

tia,
chris

The blue (ign1) wire that runs along the inner side of the pass valve cover to the alt field. T into it right there at the choke. You may need to run it thru a resistor in series first such as the white OE choke resistor piece if it comes off 2 quick but this'll get you started

We usually connect the electric choke lead to the 12V input of the ballast resistor..

Just my $0.02...

Quote:

---

We usually connect the electric choke lead to the 12V input of the ballast resistor..

Just my $0.02...

---

I do that also...some "professionals" don't agree with it but I never had any problems on several cars over 4 decades.