Posted By: Prince_Valiant
magnum lifter question... - 06/01/11 04:17 PM
The oil feed side of the lifter should be down toward the oil feed/supply from the block, correct?
tia,
chris
tia,
chris
magnum lifter question...
Posted By: gdonovan
Re: magnum lifter question... - 06/01/11 04:49 PM
Quote:
The oil feed side of the lifter should be down toward the oil feed/supply from the block, correct?
tia,
chris
Hole facing up.
Posted By: buildanother
Re: magnum lifter question... - 06/01/11 04:57 PM
The feed hole is usually in a recessed area going all the way around lifter, so it shouldn't matter. 
Posted By: gdonovan
Re: magnum lifter question... - 06/01/11 07:59 PM
Quote:
The feed hole is usually in a recessed area going all the way around lifter, so it shouldn't matter.
Factory service manual states must be facing up.
Posted By: Prince_Valiant
Re: magnum lifter question... - 06/01/11 09:31 PM
thanks for the help guys 