Posted By: ebodyseast
Distributor oil pump drive - 05/01/11 03:24 PM
Want to oil an engine by priming the oil pump with a Mopar hex drive rod - any tips on how to remove the oil pump gear drive in a BB, does the intake manifold HAVE to come off? Thanks Moparts
Posted By: Supercuda
Re: Distributor oil pump drive - 05/01/11 03:26 PM
You do not need to pull the intake, just the distributor and drive gear, use a long flat blade screwdriver, put it in the drive gear slot and turn it CW, once it's up out of the cam gear you might need a long needlenose pliers to pull it out. Some times you can just wedge the screwdriver enough to pull, sometimes you need the pliers.
Posted By: ebodyseast
Re: Distributor oil pump drive - 05/01/11 03:45 PM
Thanks for the great tip Supercuda, sure do appreciate you..