Sanding Scroll for head porting...where to get??

Posted By: Troy

Sanding Scroll for head porting...where to get?? - 04/21/11 07:25 PM

Hi everybody, hope all is well.

Where is a good place to get sanding scrolls?? I'm going to start working on my heads and it is time to stock up.

Thanks, Troy

Posted By: 1_WILD_RT

Re: Sanding Scroll for head porting...where to get?? - 04/21/11 07:50 PM

http://shop.ebay.com/sis.html?_nkw=300+ABRASIVE+ROLLS+sanding+cartridge+porting+polishing

Posted By: maximum entropy

Re: Sanding Scroll for head porting...where to get?? - 04/21/11 08:23 PM

i make my own out of all thread. i cut a slot in the end, and slide emery cloth in the slot, wind it the appropriate direction, and off i go! it works as good as anything i've ever used.

Posted By: Dcuda69

Re: Sanding Scroll for head porting...where to get?? - 04/21/11 10:15 PM

Goodson has that stuff also

http://www.goodson.com/

Posted By: Chilort

Re: Sanding Scroll for head porting...where to get?? - 04/22/11 04:01 AM

Grainger.

Posted By: topside

Re: Sanding Scroll for head porting...where to get?? - 04/22/11 04:33 AM

Might want to shop around: Standard Abrasive, maybe McMaster-Carr.

Posted By: BradH

Re: Sanding Scroll for head porting...where to get?? - 04/22/11 04:39 AM

Off the top of my head...
- Mondello
- RuffStuff.com (I think that's the correct name)
- Powerhouse Tools (division of COMP Cams)

Posted By: Troy

Re: Sanding Scroll for head porting...where to get?? - 04/22/11 04:57 AM

Ok, looks like I have a little research to do. Thanks for the leads.

Anybody else??

Posted By: hooziewhatsit

Re: Sanding Scroll for head porting...where to get?? - 04/22/11 05:39 AM

Quote:

i make my own out of all thread. i cut a slot in the end, and slide emery cloth in the slot, wind it the appropriate direction, and off i go! it works as good as anything i've ever used.

I'll have to remember that trick