383 A/C P/S to Non A/C Manual Steering question

I have a 383 I'm building that had A/C components. The car it's going into is a non A/C, manual steering car.

Are pulley's specific to each set-up? I know on the A/C the alternator wraps around the A/C, but without it is it possible to route it to the WP and down to the crank?

I'm just not sure what exactly I need to tie the alternator, WP and crank together.

Thanks

Non A/c uses different pulleys , one single belt tie all 3 together and the alternator mount is different from the A/C setup , find it used or Bouchillon sells it all .