1966 B-Body 8-3/4 to Dana 60

Hello installed dana 60 in my 1966 B-Body.It had 8 3/4 .How do I measure to or where to properly cut down the drive shaft to fit.Or is there a lenght it will be...Thanks alot Donnie

I think I seen the measurements for Dana-VS-8 3/4 from axle to pinion in the tech archives
Gus

I am pretty sure it needs to be shortened 1 1/8" when going from 8.75 to Dana 60. DrDiff can verify.

Quote:

---

I am pretty sure it needs to be shortened 1 1/8" when going from 8.75 to Dana 60. DrDiff can verify.

---

That's what I calculated when I was doing mine.