Posted By: Magnumguy
BEST INTAKE FOR A 360 - 04/01/11 06:18 PM
78 360 engine, not raced, just a good one for performance and mileage. Edelbrock? Weiand?
BEST INTAKE FOR A 360
Posted By: MoparforLife
Re: BEST INTAKE FOR A 360 - 04/01/11 06:22 PM
LD340 if you can find one. RPM or Airgap next choice. All are by Edelbrock
Posted By: MoparforLife
Re: BEST INTAKE FOR A 360 - 04/01/11 08:04 PM
And they would be about 1/2 price if you are lucky - Here check this out: http://cgi.ebay.com/ebaymotors/MOPAR-INT...sQ5fAccessories
Posted By: Lew
Re: BEST INTAKE FOR A 360 - 04/01/11 09:25 PM
Quote:Bill i have an EDDY RPM if interested.
78 360 engine, not raced, just a good one for performance and mileage. Edelbrock? Weiand?
Posted By: boydsdodge
Re: BEST INTAKE FOR A 360 - 04/01/11 10:12 PM
Edelbrock performer with thermoquad
Posted By: cudazappa
Re: BEST INTAKE FOR A 360 - 04/01/11 10:21 PM
my second choice would be an eddy performer with a 600-650 vac sec Holley or maybe even a 670 Holley Street Avenger.
Posted By: dOrk !
Re: BEST INTAKE FOR A 360 - 04/01/11 10:28 PM
Leaning more to MPG ? .... a TQ and an old-school Eddy SP2P ! 
Posted By: MoparforLife
Re: BEST INTAKE FOR A 360 - 04/02/11 12:34 AM
Quote:I would sooner use stock cast iron spread bore 4 barrel intake even be low $$ compared to a Performer. Only advantage to the Performer is a little weight.
my second choice would be an eddy performer with a 600-650 vac sec Holley or maybe even a 670 Holley Street Avenger.
Posted By: Mopar_Country
Re: BEST INTAKE FOR A 360 - 04/02/11 01:12 AM
Quote:
I would sooner use stock cast iron spread bore 4 barrel intake even be low $$ compared to a Performer. Only advantage to the Performer is a little weight.
Posted By: DusterKrazy
Re: BEST INTAKE FOR A 360 - 04/02/11 01:33 AM
Edelbrock Rpm air gap or the LD340.
Speaking of thermoquads, does Demon sizzler still build them??
Speaking of thermoquads, does Demon sizzler still build them??