Moparts
Dana 60 Pinion Nut
Posted By:
6T9Hemi
Dana 60 Pinion Nut -
03/30/11
09:14 PM
What size socket is needed to remove the pinion nut on a 1969 B body Dana 60?
Posted By:
446acuda
Re: Dana 60 Pinion Nut -
03/30/11
09:58 PM
Either 1-5/16(most likely) or 1-1/4"
Posted By:
65rbdodge
Re: Dana 60 Pinion Nut -
03/31/11
12:33 PM
i think it is 1 5/16" i know mine was not 1 1/4" because i had to borrow a socket to fit it and i already had a 1 1/4" to for the crank/ballancer bolt.
© 2024
Moparts Forums