Edelbrock Cylinder Aluminum heads

Any body running these heads.Good or bad any input would be helpful.Been running warmed over 906's But tired of putting money in steel heads. Thanks Scott

Yes, I have them on my race car. Very happy with them.

Yes I have them on both my street cars, there great!

I run a set on a 496. Great head. Lots of folks run "out of the box" but a once over before use is a good idea. Check guide fit and upgrade to 10 degree locks and retainers if using a larger cam.

Quote:

---

I run a set on a 496. Great head. Lots of folks run "out of the box" but a once over before use is a good idea. Check guide fit and upgrade to 10 degree locks and retainers if using a larger cam.

---

Both of mine were put on right out of the box with no issues, small block and BB heads. They are street cars, not race cars.

If I was building a race engine then yes I would take them apart first, but I would probably be running different heads.