Moparts

904 Trans valve body Question

Posted By: Hoop

904 Trans valve body Question - 03/21/11 09:49 PM

I got a V8 904 trans with maybe a bad valve body & was wondering if thear would be any pressure differentes if you used a valve body form a 904 6cl ?

Posted By: JohnRR

Re: 904 Trans valve body Question - 03/21/11 09:53 PM

No the VB should be the same , you could compare the distance of the adjusting plate on the pressure regulator between the 2 , otherwise throw it in and go .
Posted By: scratchnfotraction

Re: 904 Trans valve body Question - 03/21/11 10:06 PM

non loc up vb in a non loc up 904

loc up vb in a loc up 904

should swap right in
Posted By: RapidRobert

Re: 904 Trans valve body Question - 03/21/11 10:20 PM

Quote:

904 trans with maybe a bad valve body


describe what's going on w it/how it's acting
Posted By: Hoop

Re: 904 Trans valve body Question - 03/22/11 02:06 AM

well, fall 2009 it wint out on me & I had it rebuilt by my Mechanic with new disc, new, stock none lock up TC & some other stock parts that I had to order, but I had to get the Front Ring Gear from a good 904 6cl trans that I got, because the place I got the parts from did not have it & the VB should be Stock because it was never changed out. The problem is that it don't hold back when you pull it down in second gear & my Mechanic tould me its eather kickdown band needs readjusting or when it went out on me the metal going in the VB may have scratch it & he missed that when he had it apart, so if it is the VB then, I'm just going to use the one from my 6cl 904.
Posted By: RapidRobert

Re: 904 Trans valve body Question - 03/22/11 02:12 AM

it wont shift down into 2nd when you shift down to manual 2nd? And it did b 4?
Posted By: Hoop

Re: 904 Trans valve body Question - 03/22/11 02:27 AM

Yes, when you pull it down in second gear by hand it don't hold back, but drive works like it did & first holds back good, but second was holdin back just fine befour I had it redone!
Posted By: RapidRobert

Re: 904 Trans valve body Question - 03/22/11 03:46 AM

Hoop I've gone as far as I can & I'll have to defer to Kunkel from here.
© 2024 Moparts Forums