70-72 B body sway bar in a 65 K frame

I am thinking about modifying a 65 B body K frame to accept a 70-72 B/E sway bar. Has anyone done this, or thought about doing this? What do you think?

I compared the 65 and 69 K frames. The 69 bar brackets will bolt on after you drill the holes.
I have no idea about the later sway bar.

I was going to put a 70-72 K frame in my 65 B body to get the integrated sway bar, but after some research I found it might create other unwanted problems. You are right the outer bracket will bolt on after drilling holes. The modifying would involve creating clearance notches in the frame. The only picture of a 70-72 K frame on ebay is attached. Look at the outer edge near where the brackets would bolt on.

Sorry that picture is worthless

Quote:

---

I compared the 65 and 69 K frames. The 69 bar brackets will bolt on after you drill the holes.
I have no idea about the later sway bar.

---

So you're saying that with just drilling the holes in the K and using 66-69 LCAs with the bracket, a 66-69 Sway bar will bolt in? I never thought of that and its good to know. Thanks