Posted By: VITC_GTX
Installing head bolts - 03/14/11 01:00 AM
'70 383.
Head bolts have blind holes if I remember correctly, so no teflon on the threads, correct?
Do you prefer dry or with oil to torque them down?
Posted By: RapidRobert
Re: Installing head bolts - 03/14/11 01:15 AM
I dip the threads in 30 wt eng oil then blow em off w shop air EDIT I would chase the threads w "thread chasing" taps which are different from a regular tap/die set. they dont dig into the threads as much & a set of em (taps) is cheap
Posted By: Runner
Re: Installing head bolts - 03/14/11 11:19 PM
if these are aluminum heads then i use antiseize. i assume they are sence you said they are blind holes?
Posted By: DaytonaTurbo
Re: Installing head bolts - 03/14/11 11:23 PM
What brand of bolts are you using? If they're ARP, they give torq specs with 30wt oil and a different spec with their special arp moly lube. I always used just used straight 30wt non detergent oil.
Posted By: Runner
Re: Installing head bolts - 03/14/11 11:28 PM
ooops i thought i read header bolts. oil is what i use on head bolts
Posted By: VITC_GTX
Re: Installing head bolts - 03/15/11 01:48 AM
Stock bolts.
Looks like I'll use some oil.
Thanks to all.