8 3/4 builders in Indy???

I'm looking for a gear change and a rebuild for my 8 3/4 center section and am looking for someone in or near Indy to do the job. I've done most everything except rebuild rearends and would feel better getting this done right the first time by someone who knows what he's doing. I've talked to a couple of guys who as usual do a lot of GM/Ford stuff, but not Mopar. I'm sure they aren't much different but would feel better with someone who's familiar with Mopars. I'm on the east side if that helps, but will travel!
Thanks in advance!

Anyone???

The best advice I could give you is,you are not that far from Moser Engineering.I would look into that if nobody else can help.
Keith

Contact Rick, Blown71X

https://board.moparts.org/ubbthreads/show...part=1&vc=1

He might be able to help you out.

Check with Ben at Promax. He would know someone if his shop can't.

sales@promaxcarbs.com

Thanks will check them out!

Hi Keith, I am on the east side of Indy also.

I have done my own, but also have a friend who does transmisson work for a living and has done my gears in the past, before i tried it myself. If you want to do your own, i can help you out. It's really not that hard.

let me know,
Mike
moparman68@sbcglobal.net

Rick Allison at A&A transmission did the 8 3/4 I had in a Charger, quality was outstanding.

And Blown71X would also be a good one to contact.