Moparts

DEAD DAKOTA *DELETED*

Posted By: BUBBAZ572

DEAD DAKOTA *DELETED* - 02/09/11 07:21 PM

Post deleted by BUBBAZ572
Posted By: superwrench

Re: DEAD DAKOTA - 02/09/11 07:33 PM

Sounds like you've damaged the crank sensor at the rear of the engine/bellhousing.
Posted By: mike s

Re: DEAD DAKOTA - 02/09/11 07:35 PM

Did you use all the sensors from the original engine? Was the distr (cam sensor) out of the engine? Did you use the original flex plate? Relays ok? You did put another 3.9L in right?

Posted By: BUBBAZ572

Re: DEAD DAKOTA - 02/09/11 07:36 PM

USED ALL OF THE SAME SENSORS.
Posted By: mike s

Re: DEAD DAKOTA - 02/09/11 07:44 PM

Cam sensor is correctly located? Rotor is turning?
Posted By: Todd

Re: DEAD DAKOTA - 02/09/11 07:49 PM

Did you check for power at the ASD relay? And is it operating?
Posted By: BUBBAZ572

Re: DEAD DAKOTA - 02/09/11 07:53 PM

CAM SENSOR IS OK,ROTOR IS TURNING, CHANGED THE ASD RELAY.
Posted By: buildanother

Re: DEAD DAKOTA - 02/09/11 07:58 PM

Do you get the 2 second running of the pump, once you turn key on?
Posted By: BUBBAZ572

Re: DEAD DAKOTA - 02/09/11 08:05 PM

PUMP WILL NOT RUN.
CAN MAKE IT RUN BY JUMPING ACROSS RELAY BUT THE ENGINE WILL STILL NOT RUN.
Posted By: mike s

Re: DEAD DAKOTA - 02/09/11 08:06 PM

If you can touch the relays while someone turns the key on and off you can check them for power,they should click on and off w/the ign switch.
Posted By: 340SHORTY

Re: DEAD DAKOTA - 02/09/11 08:14 PM

unlock your caps !!!!
Posted By: stumpy

Re: DEAD DAKOTA - 02/09/11 08:44 PM

No need to yell at us.
Posted By: BUBBAZ572

Re: DEAD DAKOTA - 02/09/11 08:54 PM

RELAYS ARE GOOD
Posted By: stumpy

Re: DEAD DAKOTA - 02/09/11 09:03 PM

Bubba's reply to our simple request to turn off the caps. Nice guy isn't he. I guess he doesn't understand internet manners.

"NOT YELLING
YOU ARE AN ASS
DO NOT RESPOND IF YOU DO NOT HAVE A SOLUTION TO PROBLEM"
Posted By: superwrench

Re: DEAD DAKOTA - 02/09/11 09:07 PM

Quote:

Did you use all the sensors from the original engine? Was the distr (cam sensor) out of the engine? Did you use the original flex plate? Relays ok? You did put another 3.9L in right?





Sorta where I was coming from when I mentioned the crank sensor. I've see so many that were cracked in the engine change process and then a no start.
If that Distributor was taken out and not put back in EXACTLY in the position it came out, the distributor will be out of phase and probably not start. The computor needs to see a cam and crank signal to run the fuel pump.
Do you get the fuel pump "priming" for 2 seconds when you first hit the key to "ON"?
Posted By: stumpy

Re: DEAD DAKOTA - 02/09/11 09:13 PM

He just PMed me this. He really knows how to follow the rules about profanity here doesn't he. I guess things like that don't pertain to him. This kind of stuff from a guy that's been here for 4 years and post 55 times all asking for help and never helping anyone in return.

"NOW I AM YELLING, [Edited by Moparts - Family Friendly Site - Keep it clean] HEAD"
Posted By: not_a_charger

Re: DEAD DAKOTA *DELETED* - 02/09/11 09:37 PM

Quote:

Post deleted by BUBBAZ572




Good job.
Posted By: moparts

Re: DEAD DAKOTA *DELETED* - 02/09/11 10:15 PM

Quote:

Quote:

Post deleted by BUBBAZ572




Good job.




Agreed , If you ask a question and moparts members take the time to answer your question, Why then do you feel the need to delete your question?

What your so important the NO one else will benefit from the info or you just so block headed that you think your the only one that should read the thread

Maybe we should just start deleting accounts of members that do this
Posted By: not_a_charger

Re: DEAD DAKOTA *DELETED* - 02/09/11 11:09 PM

Quote:

Maybe we should just start deleting accounts of members that do this




Pretty please?
Posted By: 340SHORTY

Re: DEAD DAKOTA *DELETED* - 02/10/11 12:02 AM

IF YOU DONT HAVE A ANSWER DO NOT RESPOND


He PMd me the above statment
Posted By: Todd

Re: DEAD DAKOTA *DELETED* - 02/10/11 12:49 AM

Quote:

Quote:

Maybe we should just start deleting accounts of members that do this




Pretty please?





I feel used.
© 2024 Moparts Forums