Posted By: CHRGR69
Battery Cables - 02/01/11 06:29 PM
Good source for CUSTOM or OEM NOS cables, not GENERIC.
Recently got some from Herbs and liked the quality and match
Posted By: ahy
Re: Battery Cables - 02/02/11 01:39 AM
For custom they are not hard to make and don't require special tools. In addition to wire, ends and heat shrink tape you need a vise grip, propane torch and rosin core solder. Crimp (where applicable), heat, fill with solder and finish with large diameter heat shrink. Just don't forget to put the heat shrink on first.
NAPA usually stocks all common wire sizes and the necessary ends.