Posted By: Yesdogjr
PP833 Trans ID Help - 01/31/11 10:47 PM
I really need some trans ID help. Here are the numbers from the machined boss on the passenger side:
2B132150
PP833 3624 0143
A3
C 99129 H
Any help from you Guru's out there would be Great. Thanks a Million
Posted By: JohnRR
Re: PP833 Trans ID Help - 01/31/11 11:47 PM
What do you want to know ?
It's from a car built at hamtramack during the 1972 model year ?
Posted By: 71X-mark
Re: PP833 Trans ID Help - 02/01/11 03:06 AM
The build date for this trans is June 30, 1971.
Posted By: Yesdogjr
Re: PP833 Trans ID Help - 02/01/11 05:48 PM
Thanks!!
I was wondering if there was anything special about this trans that I would need to pay attention to. What is the gear ratios and such. I am almost done with the resto on this car and just need to install the drive train. When I bought the car two years ago it had a dana 60 from a 68 B-body and the motor is a 340 from a 68 as well. Unfourtunatly I cannot read the vin on the block.
When I rebuilt the motor and installed new stock length 340 push rods they were too long. After a week of severe frustration I finally decided to have Smith Brothers cut some custom rods and be done with it. Upon calling them and talking with their Mopar guru he advised that the reason the stock rods were too long is because the adj rockers that came on the TA heads require a shorter rod. So that was a nice surprise.
Posted By: Alaskan_TA
Re: PP833 Trans ID Help - 02/02/11 02:20 AM
I have a photo of the tag, no magic involved.
This time.