Posted By: BTTG
machine shops in central PA - 12/20/10 01:46 PM
Recommendations for an engine? Plan to assemble myself.
machine shops in central PA
Posted By: Badfish67
Re: machine shops in central PA - 12/20/10 02:22 PM
Ryan is the only person I would have do any engine work.
http://www.shadydellspeedshop.com/
http://www.shadydellspeedshop.com/
Posted By: 62maxwgn
Re: machine shops in central PA - 12/20/10 04:56 PM
Two of the best you will find. 
Bob Repine
Bob,s Automotive,
Eldred,PA
8142254485.
Has his own shop,been doing 90% Mopar since the early 60's.
Old Super Stock racer to boot.
or
http://www.hemphillracingengines.com/
Bob Repine
Bob,s Automotive,
Eldred,PA
8142254485.
Has his own shop,been doing 90% Mopar since the early 60's.
Old Super Stock racer to boot.
or
http://www.hemphillracingengines.com/
Posted By: 62maxwgn
Re: machine shops in central PA - 12/20/10 05:09 PM
Quote:
Ryan is the only person I would have do any engine work.
http://www.shadydellspeedshop.com/
Small block only.
Posted By: ThermoQuad
Re: machine shops in central PA - 12/21/10 11:28 AM
Quote:
the best you will find.
Bob Repine
Bob,s Automotive,
Eldred,PA
8142254485.
Has his own shop,been doing 90% Mopar since the early 60's. Old Super Stock racer to boot.
http://www.hemphillracingengines.com/
well my secret engine builder has been outed...this is too funny, wait till Bob hears he is famous...Bob is retired and only doing work for a few like me.
Posted By: 62maxwgn
Re: machine shops in central PA - 12/21/10 02:05 PM
Quote:Quote:
the best you will find.
Bob Repine
Bob,s Automotive,
Eldred,PA
8142254485.
Has his own shop,been doing 90% Mopar since the early 60's. Old Super Stock racer to boot.
http://www.hemphillracingengines.com/
well my secret engine builder has been outed...this is too funny, wait till Bob hears he is famous...Bob is retired and only doing work for a few like me.
But he still spends 7 hr's a day, 5 day's a week.
Posted By: Cloned_Cuda
Re: machine shops in central PA - 12/23/10 01:41 AM
Ryan at Shady Dell has built big blocks and Hemis.
Just did a Pump Gas 426 Hemi for someone this past spring, runs in the 11's.
Just did a Pump Gas 426 Hemi for someone this past spring, runs in the 11's.
Posted By: 71charger
Re: machine shops in central PA - 12/23/10 03:32 AM
If you're in south central PA, Gunther's in the Walkersville, MD area is excellent.
Posted By: 340Cuda
Re: machine shops in central PA - 12/31/10 04:03 PM
I would recommend Ryan highly!
I also have heard of a guy that used to work for Joe Amato, however he may just be a machinist and not do complete engines. Does anyone know who this is?
Thanks,
Bill
I also have heard of a guy that used to work for Joe Amato, however he may just be a machinist and not do complete engines. Does anyone know who this is?
Thanks,
Bill