Posted By: joedust451
Q-Jet with RPM & adapter? - 10/25/10 07:22 PM
Just wondering if this will work decent or not, are any of you running a Q-Jet on an RPM with the adapter? I'm looking for better mileage over my 650dp, Its on a 360 magnum with the Crosswind RPM, i have a 1705xxxx QJ in good condition & an adapter, i'm not to concerned about the linkage because i'm running a cheetah FMVB, so no kickdown, If anyone is running this set-up on there SB, How well do it do?
Posted By: gch
Re: Q-Jet with RPM & adapter? - 10/25/10 08:44 PM
May not be relevant but years ago on 440 magnum I put a Tquad on my stock iron intake with an adapter and was not happy.Not having the secondary opening of the intake as large as the carb opening seemed to kill it.It did'nt run any better than the smaller holley on the iron intake.
IMO you need a spreadbore intake to get the benefit.
it will work ok,just may not be the best combo
Posted By: Mr.Yuck
Re: Q-Jet with RPM & adapter? - 10/25/10 09:32 PM
Not sure why your mpg's would improve. I'd just tstick with what you have. Especially if it's on and tuned. If you are that concerned about mpg maybe lean it out some and set your timing back a few.
Posted By: DaytonaTurbo
Re: Q-Jet with RPM & adapter? - 10/25/10 10:10 PM
Drill the LA intake then. It's been done.