Posted By: whitemtnelf
2000 Dakota ABS - 09/08/10 12:57 AM
I had to replace the ABS speed sensor in the rear axle of my Dakota. I had to remove the diff cover to clear out the remains of the last sensor. I refilled and used limited slip additive.This cleared the error but there is a new problem. The ABS pump cycles exactly between 10-15mph. It doesn't happen at any other time, it doesn't feel like the brakes are being applied, and there aren't any error lights or codes.
Any ideas on how to diagnose this?
Thanks
Any ideas on how to diagnose this?
Thanks