Posted By: DUSTERB'D
tube or not to tube - 08/22/08 07:15 PM
I just got a set of 28-11.5-15 M/T slicks, these will be on 10" rims, should I run tubes in these or is it not needed. The rims are drilled for screws, so if I use tubes they should be screwed down to keep from shearing off valvestem, right?
Posted By: BRawls
Re: tube or not to tube - 08/22/08 07:54 PM
You want to screw the tires to the wheel either way. A tube MAY cost you a little ET on a high HP car with large tires (dragster). The tire will lose air over a short period of time without the tube. With the size tire you are running I would run the tube and not worry.
Posted By: 69MOPE
Re: tube or not to tube - 08/23/08 12:57 AM
Run tubes! You will thank me instead of finding a flat tire or two once a month.