Posted By: garymendy
yoke question please help - 08/18/10 04:53 PM
a buddy of mine needs help on the input shaft of a 70 and later yoke..
how many splines are on the yoke..
is it 10 or a fine spline?
thanks,
garymendy@yahoo.com
i am guessing on the tranz slip yoke for a 70
it will either be a auto or manual tranz 727 yoke or the smaller auto only 904/a999 yoke
I can count the splines and post back later... but,it goes by 727/4speed or 904 yoke most times
904 being the smaller one
727/4speed same size/spline count
Posted By: John_Kunkel
Re: yoke question please help - 08/18/10 07:49 PM
The '70 and later pinion can have either 10 or 29 splines, the size of the nut will tell; 1 1/8" nut has 10 splines, 1 1/4" or larger nut has 29 splines.
my bad...i guess it was pinion yoke
what john said