Posted By: spk2go
Cuda Challenger cassette players - 02/26/08 12:39 AM
Does anyone know where to get the drive belts for the 1971-74 cassette players?
Cuda Challenger cassette players
Posted By: attaboy
Re: Cuda Challenger cassette players - 07/08/08 09:41 PM
Hi,
I'm a new member so I didn't see your post until today. If you're still looking for the two drive belts for your original Mopar Cassette/Recorder/Player, go to your local seal and gasket distributor and get 1/16" thk. O-Rings of the appropriate length. I believe that the Parker O-ring numbers are #031 and #045. I think thaat those are the numbers. Check to mak sure.
attaboy
I'm a new member so I didn't see your post until today. If you're still looking for the two drive belts for your original Mopar Cassette/Recorder/Player, go to your local seal and gasket distributor and get 1/16" thk. O-Rings of the appropriate length. I believe that the Parker O-ring numbers are #031 and #045. I think thaat those are the numbers. Check to mak sure.
attaboy
Posted By: BigMoneyLewis
Re: Cuda Challenger cassette players - 07/09/08 03:41 AM
I don't know who the original vendor was for the belts, but man those things turned into "gooo" after a few years. 8 track belts just dry rot and break, but those cassette belts typically melted .
Greg
Wards Classic Car Radio Repair Specializing in restoration and sales of Mopar A B E body radios
We can restore YOUR radio usually in less than 7 days
Visit our NEW website..
http://www.wardsclassiccarradiorepair.com
gregward@mchsi.com
phone 256-852-0955
Greg
Wards Classic Car Radio Repair Specializing in restoration and sales of Mopar A B E body radios
We can restore YOUR radio usually in less than 7 days
Visit our NEW website..
http://www.wardsclassiccarradiorepair.com
gregward@mchsi.com
phone 256-852-0955